SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level

SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level

Ref: JP87138

SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level

The SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level accepts balanced or unbalanced microphones with standard 3 pin XLR connectors. Includes an on-board mic to line level converter, high gain pre-amplifier and 8V phantom power.
SigNET's Outreach Plate audio input extension system comprises a range of wall, ceiling and desk mountable single gang audio input plates specifically designed to increase the audio input capability of an induction loop system. Covering the most common variants of audio connector, they work by mixing the signals from various audio input sources into one balanced line level input which can be fed into the line input of a compatible amplifier.
Mountable on 25mm back boxes, each plate features a built-in mixer, pre-amp, input level control and balanced output. The fact they can be installed at the most convenient point on an installation overcomes the need for long and potentially hazardous microphone/audio leads.
Typically, up to 10 Outreach plates (any mix) can be daisy-chained to one balanced line level input with cable lengths of up to 100m easily achievable using standard two-pair audio cable with no recognisable degradation of audio signal quality.
Each outreach plate requires four wires, two balanced line (A+, A-), one ground (0V) and one power connection (12-32 V DC regulated).


SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level Features

- Accepts balanced or unbalanced microphones with standard 3 pin XLR connectors
- Includes an on-board mic to line level converter, high gain pre-amplifier and 8V phantom power
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair audio cable is ideal for most applications
- Network lengths of 100m easily achievable with no degradation of sound quality
- Built-in pre-amp, mixer and level controls included on all variants
- Overcomes the need for excessively long microphone and audio leads
- 12-32V dc operation
- +6dB overload capability
- Surface mountable on 25mm UK single gang back boxes
- Effectively acts as a multi-point distributed mixer with individual level controls
- Optional wall-mounting 'AFILS ACTIVE' and magnetic field strength indicators available for use with audio-frequency induction loop systems


SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level Specifications

- Supply volts: 12 to 37V regulated DC
- Supply current: 6 to 11mA
- Input signal level: -40dBu to -30dBu
- Input gain control: ∞ to 0dB
- Input impedance: 500Ω
- Phantom volts: 11V/0V (link selectable)
- Signal to noise ratio: >60dB
- THD + noise: <0.07%

Physical:
- Dimensions (W x H x D): 85 x 85 x 25mm
- Weight: 0.105kg


SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level Compatibility

- Fits a standard UK 1-Gang Back Box



For Product Information & Pricing please Click Here Contact us for more images if needed