The MBN FC-400 foam-cannon has an output-distance of approximately 4-6m and can be used for all foam-parties and other shows, where the foam should be shot into the air or into the crowd of people.
Because of its compact size, the MBN FC-400 can easily be transported. Therefore it's ideal for promoters and mobile discotheques.
The foam-cannon can easily be installed, suspended by four tags. With the optional available metal rack on castors the foam-cannon can be paned horizontal and vertical on the ground.
The MBN FC-400 has a foam output of about 30.000 litres/min. and is Made in Germany. The engine of the ventilator and the pump are German quality products as well.
The MBN FC-400 consists of the following components:
Pump Regulation of quantity
2m hose (between tank and pump)
10m hose (between pump and cannon).
For the operation of the MBN FC-400 a tank is required for the storage of the mixture (water and foam fluid).
MBN provides for the MBN FC-400 a tank with a content of 600 litre or 1000 litre.
MBN provides high-quality, totally safe foam concentrates in25 l and 60 l containers.
The MBN foam-fluid was especially developed for foam events and is dermatological tested (good to very good skin tolerability). If required, foam fluids can also be made available with various aromas.
Weight cannon, 25 kg
Dimensions cannon, 760 x 300 mm
Foam output: 10 cubic meters per minute
Quantity of foam, 30L /min
Output-distance, 4-6 m
Voltage supply, 230 V / 50 Hz
Power consumption, 700 VA
Weight of pump, 10 kg
Dimensions of pump, 390 x 230 x 170 mm
Water consumption, 1-15 l/min
Power consumption of pump, 800 VA