JBL PD6212/95 - Precision Directivity Full Range Two-Way Loudspeakers
The JBL-PD6212 Series Precision Directivity loudspeakers are designed for applications requiring high output capability with excellent pattern control. The speakers can be utilised alone in music or speech systems where frequency extension to 80 Hz is adequate or combined with subwoofers to create extended bandwidth full range systems.
300 mm (12 inch) horn-loaded LF and large format HF driver – high sensitivity design with high continuous SPL capability.
Large PT Progressive Transition waveguides provide broad band pattern control, low distortion at high SPL levels and smooth frequency response.
Rotatable low and high frequency waveguide allow either horizontal or vertical cabinet orientation.
Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes.
90 Hz to 16 kHz ( ± 3 dB)
90° x 50°
Bi-amp / Passive switchable
6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850Hz
Transducer Power Rating
(AES) LF: 400 W (1600 W peak), 2 hrs. 300 W (1200W peak), 100 hrs
75 W (300 W peak), 2 hrs
Long-Term System Power Rating
(IEC) Passive Mode: 300 W (1200 W peak), 100 hrs
Maximum SPL LF:
135 dB SPL (141 dB peak)
134 dB SPL (140 dB peak)
System Sensitivity Passive Mode:
Low Frequency Driver
M222-8A 300 mm (12 inch) driver with 75 mm (3 inch) voice coil
High Frequency Driver
2453H, 38 mm (1.5 inch) exit compression driver with 100 mm (4
inch) voice coil
Trapezoidal with 12.5 degree side angles, 16 mm (5/8 inch) exterior
20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
Black DuraFlex finish. White (-WH) available upon request.
Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
Neutrik Speakon NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375
inch) spade lugs. Speakon in parallel with barrier strip for loop through.
Mil-Std 810; IP-x3 per IEC529.
(H x W x D in vertical orientation) 991 x 673 x 897 mm
79.5 kg (175 lb)
229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.