ANTARI DNG 100, When connected to a quality fogger / smoke machine, the DNG-100 Fog Cooler produces a low-lying smoke with an effect virtually indistinguishable from that created by dry ice. The DNG-100's conversion of normal fogger output to a floor-hugging cloud of dense fog can be regulated to produce either a continuous stream of low-lying fog or extremely large bursts of pure fog.

Electronic sensors allow the DNG-100 to constantly monitor its operating conditions in order to maintain the unit's optimal temperature. Finned evaporators can effectively cool large volumes of fog, with warm air being expelled through the high capacity vents located on the top of the unit. Operation can be as simple as placing the DNG-100's intake within six inches (15cm) of a fog machine's output nozzle. However, the DNG-100's output volume is regulated by the fog machine to which it is attached, so optimal performance is achieved by using a quality fog machine, such as Antari's Z-1200, 1500, 3000,  which allows complete control of its output volume. Additional performance enhancements can be achieved through the use of hoses to conduct the fog more efficiently. 

Please refer to the diagrams below for examples of  DNG-100 optimal implementations.
A compact, completely self-contained unit, the DNG-100 requires no compressed gas cylinders or water tanks. In addition to its intelligent design, the DNG-100 is extremely easy to operate. No external controls are required, as the unit is fully operational upon being plugged in. Ease of operation is further ensured by the DNG-100's is used with a Low level fog fluid  which will dissipate when reaching room temperature.

SPECIFICATIONS
Power: AC 120V/60Hz, 230V/50Hz
Power Consumption: 750 W
Start Current: 4000 W
Fuse: 125V / 7A, 250V / 3.15A
Refrigerant: R-408A
Dimensions: 750 x 607 x 390 mm
Weight: 72 kg
Options included:
FT-10, Fog Conducting Hose
FTA-10, Fog Hose
Adaptor, (DNG input)
FTA-11, Fog Hose Adaptor (DNG output)
FTA-12, Fog output plate (used when no output hose is needed)

Optional Accessories: FTA-1/2/3 Tube adaptors (used to connect to the smoke machine)

ANTARI FTA-1,2 & 3 hose adaptors for connecting fog conducting hose FT-10 to foggers, in order to achieve strategic fog placement.

FTA-1 suitable for: X-510, X515, X530, and F-80Z

FTA-2 suitable for: Z-800, Z-1000, & Z-1200

FTA-3 suitable for:  Z-1500 & Z-3000,

Please select from the option box the FTA adaptor your require.