MiPro ACT-32H Handheld Transmitter, MiPro ACT-32H Handheld microphone transmitter for use with MiPro ACT receiver.
Extremely rugged, ergonomically designed housing.
The unique flat top multi-layered steel grille protects the capsule against impact, rolling, pop noise and ensures sound clarity.
The unique flat top multi-layered steel grille for condenser capsules and round top for dynamic capsules protect the capsule against impact, rolling and pop noise. The upper grille is able to be detached easily for cleaning and hygiene practices.
Premium true condenser microphone capsule provides high fidelity, wide frequency response, high dynamic range, rapid transient response, clarity and accurate sound reproduction.
Proprietary lockable silent on/off switch to avoid accidental power-off during performance.
Impact-resistant battery compartment holds 2 AA batteries.
Interchangeable colored rings for microphone channel identification on stage.
LCD displays group, channel, battery level & error message codes.
Low spurious PLL-synthesized technology enhances frequency stability and reliability. Patented “Built-in” antenna design.World’s first ACT function provides precise and rapid frequency sync to the transmitters.
Housing: Rugged Plastic
Oscillation Mode: PLL Synthesized
Number of Channels: 16
Frequency Range: 863~865 MHz
Bandwidth: 24 MHz
Channel Set-Up: ACT Sync
RF Output Power: 10~30 mW (country dependent)
Deviation: < ±40kHz
Spurious Emissions: <-55dBc
Max. Input Level: 140dB SPL
Display: LCD displays group, channel, battery status & error codes
Battery: 2 AA alkaline
Capsules: Standard: MU-79 ECM, Optional: MU-89 TCM or MU-59 Dynamic
Dimensions (Ø × L): 50× 233 mm (2.0 × 9.2 ")
Weight: Approx. 246 g (8.68 oz), excluding batteries
Patents & Approvals: Patented. Telecom and safety regulations approved.
Notes: Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
Channel 70 Plan
All frequencies within DR70 are deregulated for license-free use.
Due to the nature of this band we cannot guarantee completely interference-free use in all areas. Care should be taken during setup to ensure the clearest channel is selected
Channels marked * are the standard fixed frequencies currently available for MIPRO UK UHF systems
Channels marked ** are random frequencies chosen only to give the user alternative channels to use in cases of interference.
As the deregulated band is so small there are some caveats to operating more than one transmitter/ receiver.
It is not possible to run more than 3 systems in this band.
Groups of 3 that will work together are shown above as Group A / B / C
Caveats to operation when using multiple transmitters :
A: Minimum distance between transmitters to achieve 3 units with interference-free operation is 2 metres
B: Minimum distance between transmitters to achieve 3 units with interference-free operation is 5 metres
C: Minimum distance between transmitters to achieve 3 units with interference-free operation is 2 metres
A: If only 2 units are required then use CH3 and CH4 or CH3 and CH5 (No minimum distance restriction).
B: If only 2 units are required then use CH6 and CH7 or CH6 and CH8 (No minimum distance restriction).
C: If only 2 units are required then use CH9 and CHA or CH9 and CHB (No minimum distance restriction).
Please note that the transmitter works with a 1KHz Pilot Tone key, so cannot guarantee correct operation with older
receivers, to be safe please use Transmitters that are listed / shown below in the related items.
However tests that J.P. Leisure have tried do seem to work with the older Mipro
101U fixed range base units - ie 863.3MHz, 863.9MHz & 864.8MHz