LEDJ RGB 1 Controller, The RGB-1 controller has been designed to control the LEDJ Omni Tri 9, Alu Par Compact Tri, Stage Tri Par 64, Xterior Wash Tri and the IP Tri Par. With 7 preset colour buttons and 4 mode buttons, the RGB-1 can also spectrum mix unlimited colours via the RGB sliders. Also included are 0-100% dimming, blackout, strobe and sound active functions.

Easy 16 - 32 Channel DMX Controller

This unit is a 32 channel programmable DMX controller. It is possible to program 12 scenes. Furthermore there is a built-in chase, adjustable speed, chase direction and fade time. This light controller is the best solution for small light shows or test set-ups.

The QTX DM-X10 DMX Lighting Controller, 192 Channels is a 192 channel DMX controller with 12 fixtures. Each fixture controls up to 16 channels on each unit. There are 30 programmable bank buttons holding 8 scenes each. These scenes can be programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. This controller is ideal for small theatres or stage applications.

The QTX DM-X12 DMX Lighting Controller, 192 Channels with Joystick is a 192 channel DMX controller has a joystick which can be programmed to control certain channels. This is then an ideal tool to fine tune the pan and tilt movements on a moving head or scanner. It comes complete with an LED gooseneck light that can be plugged in to the rear and help in dark environments. The unit itself has 12 scanner buttons, each controls up to 16 channels on each fixture, whilst the 30 programmable bank buttons hold 8 scenes each. These scenes can be programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. This controller is ideal for small theatres or stage applications.

The QTX DM-X18 DMX Lighting Controller, 384 Channels is a 384 channel DMX controller has 16 fader channels which makes it easy to see exactly what you're doing without having to use a page up and page down button. The unit itself has 24 fixture buttons, each can control up to 16 channels on each fixture, whilst the 30 programmable bank buttons holding 8 scenes each. These scenes can be programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. It comes complete with an LED gooseneck light that can be plugged in to the rear and help in dark environments. This controller is ideal for small theatres or stage applications.

Visage Block 1, 4 Channel LED Controller, Visage Controller LED 4Ch for use with LED Block 1, LED RGB 252 LED Strip Washer and LED Parcans.

Stage Desk 24 DMX, 24 Channel DMX Lighting Controller.

Stage Desk 48 DMX, 48 Channel DMX Lighting Controller.

The ADJ WiFLY EXR Battery is a battery powered wireless DMX transceiver (transmitter/receiver in one) that is compatible with all ADJ WiFLY products. After connecting the WiFLY EXR Battery transceiver to a DMX Controller users can send a constant and reliable wireless DMX signal up to 2.500feet/760m to other ADJ WiFLY products.  The WiFLY EXR Battery has a battery life of up to 20 hours. There are digital battery life and WiFLY wireless signal strength indicators on the side of the unit. Plus, a magnetic bottom plate allows for temporary, quick and easy mounting of the WiFLY Battery transceiver onto a metal lighting fixture or object. The wireless frequency is 2.4 GHz and will coexist in busy RF environments alongside technologies like Bluetooth and Wi-Fi. The ADJ WiFLY EXR Battery transceiver is the ideal solution for event productions, nightclubs, DJs, or for any event where you do not want data cables to be seen, and when it is not easy to run power and data cables to your fixtures location.

The WiFLY RGBW8C is a 64-channel RGB, RGBW, RGBA LED wireless DMX controller. It was designed to control any standard 3 or 4 channel group of LED fixtures where channel 1 is Red, channel 2 is Green, channel 3 is Blue and channel 4 is White or Amber. Up to 8 LED fixtures or fixture groups can independently be controlled via four fixture buttons. All LED fixtures or fixture groups must be set to run in DMX mode and be addressed four channels apart for independent control. The units control panel includes 9 direct access “Static Color/Chase” buttons, which contain pre-programmed color presets and chase programs, 3 user programmable color preset buttons, 4 multi function faders that control RGBW intensities on the fly, as well as chase program “Speed”, chase program “Fade Time” and “Master Dimmer”. There is also an array of 8 buttons used to select the operation mode, including RGB Fade, Auto Run, Color Macro, Chase, Sound Active, Strobe, Manual RGBW and Blackout mode

ADJ myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX 3.0 has a new, robust hardware dongle and exciting new features to take greater command of your lightshow. Out of the package, myDMX 3.0 software will run in limited mode; 512 "Live" DMX channels and 60 "Stand Alone" DMX channels (No 3D visualizer, Easy Remote, 8 port contacts or Midi features). However, these features plus other upgrades, including additional Live and Stand Alone channels can be purchased. DMX 2.1 and 3.0 interfaces will run in Full mode when running myDMX 2.1 software. If you already own myDMX 2.1 hardware, you can download the myDMX 3.0 software for free from the Downloads tab. Note: it will run in Limited Mode. Note: myDMX 3.0 software does not work with myDMX 2.0 hardware

ADJ DMX Operator 1 - Reliable DMX Controller- Programmable Up To 240 Scenes- 192 DMX Channels- 12 Individual Fixture Channels- 8 Dimmer Faders- Easy To Use- MIDI Controllable

ADJ’s myDMX RM - DMX control software/hardware system

ADJ’s myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX RM has a new, robust, 19 inch rack mount, hardware dongle and exciting new features to take greater command of your light show. myDMX 3.0RM allows you to program your light show with myDMX 3.0 software, upload programmed data to myDMX RM then playback straight from myDMX RM in stand-alone mode without a computer. This is the ideal control solution for clubs, bars, schools and event venues where you want to make it as simple as possible. Out of the package, myDMX 3.0 software will run in Express Mode; 512 Live DMX channels & 512 Stand Alone DMX channels (No 3D visualizer, Easy Remote or Midi features).

ChamSys MagicQ MQ40N Compact Console (4 Universe)

The MagicQ MQ40N is part of a new generation of small and lightweight MagicQ Consoles specifically designed for travelling lighting designers.

The MQ40N fits within the hand luggage restrictions of all the major budget airlines including Ryanair, Easyjet and South West. Based on the same ARM technology used in modern phones and tablets the MQ40N has lower power consumpton and does not require a fan - enabling silent operation for theatrical and corporate shows.

MQ40N features a simplified version of the MagicQ GUI, designed to make the console simple and easy to use for installations, clubs and schools while still featuring advanced features such as MagicVis and MagicHD connectivity options and in-built Pixel Mapper found in all other MagicQ consoles, and utilises the same software and show formats, enabling compatibility between all products in the MagicQ range. It supports a total of four universes either by direct DMX outputs on the rear panel or via network and can be connected via network to a PC or Mac running ChamSys free MagicVis lighting visualisation software for full visualisation of all the universes at no extra cost. Alternatively, it can be connected via network to a PC or Mac running ChamSys free MagicHD media player software for output of up to 8 layers of HD media at no extra cost.

The MQ40N incorporates high reliability components, including high durability metal Neutrik connectors providing an immensely powerful complete control console in an ultra compact size. It is ideal for easy transport and fitting into small spaces, and is the console of choice for controlling lighting, video and LED. The MagicQ MQ40N also makes an ideal "tech console" for testing lighting on stage or in the warehouse.

ChamSys MagicQ MQ60 Compact Console (6 Universe)

The MagicQ MQ60 is part of a new generation of small and lightweight MagicQ Consoles specifically designed for travelling lighting designers. The MQ60 fits within the hand luggage restrictions of all the major budget airlines including Ryanair, Easyjet and South West. The MagicQ software features include easy patching from a library of 14000 fixture personalities, simple attribute selection and programming, flexible live lighting control including a powerful inbuilt Pixel Mapper.

The MQ60 can be connected via network to a PC or Mac running ChamSys free MagicVis lighting visualisation software for full visualisation of all the universes at no extra cost. It can be connected via network to a PC or Mac running ChamSys free MagicHD media player software for output of up to 8 layers of HD media at no extra cost. It also features the same flexible lighting control, media server connectivity and in-built Pixel Mapper found in all MagicQ consoles, and uses the same software and show formats, enabling compatibility between all MagicQ products.

The MQ60 supports 12 universes over Ethernet using Art-Net I, II or III, Pathport, or Streaming ACN. In addition there are four fully patchable direct DMX outputs on the rear panel. For larger shows the MQ60 can be used as a net wing to a PC or Mac runnning free MagicQ software to control 64 universes - simply connect via a network cable.

The console incorporates high reliability components, including high durability metal Neutrik Ethercon locking connectors for easy and reliable networking. As with other MagicQ consoles, the Ethernet switch is protected by the UPS, thus ensuring that both the console and the network switch maintain operation even during a power loss. It features an in-built touch screen with the same resolution as the MagicQ MQ100 consoles, but in a more compact size. In addition, there is an external monitor output for a separate display, which can be a USB or serial touch screen.

Based on the same ARM technology used in modern phones and tablets the MagicQ MQ60 has lower power consumpton and does not require a fan - enabling silent operation for theatrical and corporate shows. MIDI and Audio support is included in the MQ60 as standard - there is no need for an extra external interface.

The MagicQ MQ60 provides an immensely powerful complete control console in an ultra compact size. It is ideal for easy transport and fitting into small spaces, and is the console of choice for controlling lighting, video and LED. The MQ60 also makes an ideal "tech console" for testing lighting on stage or in the warehouse.

ChamSys MagicQ MQ70 Compact Console The ChamSys MagicQ MQ70 is the latest offering in the Compact Console range of small and lightweight consoles that you can fly with. The MagicQ MQ70 fits within hand luggage carry on restrictions of all the major budget airlines including, Southwest, Easyjet and Ryanair. The console features a 10.1” Multi touch display, with illuminated encoder and fader tracks.
The console supports 24 universes with an option to expand to 48. The console has 3 network ports enabling ArtNet and sACN direct from the console, whilst also having 4 assignable physical DMX ports supporting RDM. This feature packed console also includes WIFI inbuilt to the console for quick connection to ChamSys MagicQ Remote focus application without the need for external networking hardware.
The MQ70 features an inbuilt UPS which protects both the console and the Ethernet switch in case of power fail. It has low power consumption and does not require a cooling fan - enabling silent operation making it the ideal choice for touring shows, broadcast, theatrical and corporate shows.
With built in MIDI input and output, LTC and audio input for synchronization, the MagicQ MQ70 provides many options for integration with show control and audio systems.
The MagicQ MQ70 runs the same MagicQ software as other MagicQ consoles, meaning that shows programmed on it can be loaded and ran on any other MagicQ console (within the universe limits).

ChamSys MagicQ MQ80 Compact Console (24 Universe)

The MagicQ MQ80 is an extremely powerful console in a small size, supporting 24 universes direct from the console. The large central touch screen provides easy access to all MagicQ features and display and selection from full lighting plots. It features the same flexible lighting control, media server connectivity and in-built Pixel Mapper found in all MagicQ consoles, and uses the same software and show formats, enabling compatibility between all MagicQ products. New shows can be loaded into MagicQ consoles running older software and old shows can be loaded into newer software.

The MagicQ software features include easy patching from a library of 13000 fixture personalities, simple attribute selection and programming, flexible live lighting control and a powerful inbuilt Pixel Mapper. It can be connected via network to a PC or Mac running ChamSys free MagicVis lighting visualisation software for full visualisation of all the universes at no extra cost. Alternatively, the MQ80 can be connected via network to a PC or Mac running ChamSys free MagicHD media player software for output of up to 8 layers of HD media at no extra cost.

The MQ80 outputs all universes direct over Ethernet using Art-Net I, II or III, Pathport, or Streaming ACN – there is no need for network nodes. The console incorporates high reliability components, including high durability metal Neutrik Ethercon locking connectors for easy and reliable networking. As with other MagicQ consoles, the Ethernet switch is protected by the UPS, thus ensuring that both the console and the network switch maintain operation even during a power loss.

MagicQ MQ80 features an inbuilt power supply and UPS with locking Powercon connectors that accept voltages from 110V to 240V AC. It has a Kensington security slot for securing the product. Both soft bags and flight cases are available as optional extras.

ChamSys MagicQ MQ500 Stadium Console (64 Universe)

The MagicQ MQ500 Stadium is a new control console from ChamSys designed to operate at the highest level of show control. The MQ500 enables shows to be designed from concept to reality including lighting, media, LED and scenic design. It features dual multi touch displays in full HD with adjustable viewing angle and gesture support.

The MQ500 Stadium has inbuilt MagicVis 3D visualiser with high quality beam and gobo rendering. It also supports up to 200 universes onboard direct from the console without the need for external processing. MagicHD media server runs on board enabling pixelmapping to all 200 universes.

The MQ500 includes an intensity wheel and 100mm split crossfaders for theatre control, and incorporates 42 fader and executor playbacks for live busking.

The MagicQ MQ500 Stadium is a new control console from ChamSys designed to operate at the highest level of show control. The MQ500 enables shows to be designed from concept to reality including lighting, media, LED and scenic design. It features dual multi touch displays in full HD with adjustable viewing angle and gesture support.

The MQ500 Stadium has inbuilt MagicVis 3D visualiser with high quality beam and gobo rendering. It also supports up to 200 universes onboard direct from the console without the need for external processing. MagicHD media server runs on board enabling pixelmapping to all 200 universes.

The MQ500 includes an intensity wheel and 100mm split crossfaders for theatre control, and incorporates 42 fader and executor playbacks for live busking.

ChamSys MagicQ Mini Wing with 1 x DMX512 Output

The MagicQ Mini Wing is an extremely powerful USB control wing for connecting to your PC or Mac to control lighting, video and LED with the MagicQ PC software. MagicQ software runs under Windows, OSX or Linux. MagicQ software is free and uniquely the outputs are fully enabled, allowing you to run shows of up to 64 Universes. The Mini Wing is the smallest wing in the MagicQ range, designed for playback of MagicQ shows. The MagicQ Mini Wing is targeted at installations, which are generally programmed only once and changed infrequently. It also provides a cost-effective solution for individuals with small budgets, and as a useful back-up for MagicQ consoles.

The Mini Wing has one fully patchable direct DMX output. Connection to the PC is via USB. Power is taken from the USB connection, so there is no need for an external power supply. It connects to any PC running the MagicQ PC Software. Additional DMX connections can be made via Ethernet. The MagicQ PC software is the same software that MagicQ consoles run - enabling familiar and flexible GUI lighting control, media server connectivity options and in-built media server for LED grid arrays. And with the ability to transfer your show to other MagicQ consoles over the network or using standard USB memory sticks the MagicQ PC Wing can be used as a powerful off-line show editor or back-up system.

The MagicQ PC Mini Wing provides an immensely powerful PC based console ideal for installing into theatres, clubs, and venues for controlling lighting, video and LED. The Mini Wing is physically very small and light, making it a very attractive solution for Lighting Designers to take with them when they travel. There is no other product available that gives the power of the MagicQ software combined with real faders and buttons, and a DMX output.

ChamSys MagicQ PC Wing Compact with 2 x DMX512 Outputs

The MagicQ PC Wing Compact is an extremely powerful USB control wing for connecting to your PC or Mac to control lighting, video and LED with the MagicQ PC software. MagicQ PC software runs under Windows, Linux or OSX. MagicQ PC software is free and uniquely the outputs are fully enabled, allowing you to run shows on up to 64 Universes. MagicQ software includes the free MagicVis visualiser enabling simple visualisation of all 64 universes of lighting control. MagicQ software also includes the free MagicHD media player enabling playback of up to 8 layers of HD media through your PC or Mac 2nd monitor port.

The MagicQ PC Wing Compact enables advanced show programming and playback through real faders, buttons and encoder wheels. It provides easy access to moving light parameters via the 8 rotary encoders, and live show control through the 10 playback faders and cue stack control buttons. In additional there are 2 fully patchable direct DMX outputs on the rear panel. Improvements from ChamSys original PC Wing include the addition of six extra buttons: Previous Page, Group and four layout/macro buttons. The MagicQ PC Wing Compact is also narrower, so will fit within hand luggage restructions. Other improvements include the addition of an in-built four port USB hub, in-built power supply and the addition of an audio input for cue stack triggering.

MagicQ is simple and easy to program, enabling really quick setup - you can be up and running your show in seconds. With unrivalled live editing and live timing options, impressive changes can be made live at the touch of a button - no need to spend hours programming complex effects. The MagicQ PC Wing Compact provides an immensely powerful PC based console in a compact size. Ideal for use by touring Lighting Designers, or for installing into theatres, clubs, and venues, the MagicQ PC Wing Compact builds on the MagicQ PC Wing as the PC solution of choice for controlling lighting, video and LED.

ChamSys MagicQ Extra Wing Compact Console

The Extra Wing Compact is designed to allow users of MagicQ to extend the number of physical playbacks available to them. It has a total of 24 playbacks, split into 2 sections - one section with 12 faders and one section with 12 Execute buttons.

Each section has separate Next and Previous page buttons. The 12 playbacks faders feature Flash, Go and Select buttons, together with an LCD display for legending. The 12 playbacks with Execute buttons consist of 12 Select and Execute buttons, and an LCD display for legending.

It has an internal USB hub which enables multiple Extra Wings to be connected together.

On the rear panel there is a locking Neutrik Powercon connector, a USB socket for connection to the main MagicQ system, dual USB expansion sockets and a console lamp socket.

ChamSys SnakeSys S6 T2 Six Port Stage Box

The SnakeSys Stage Box S6 is a rugged six port 2 universe Ethernet to DMX convertor with an in-built network switch supporting three separate DMX output sockets per universe. It includes a battery so that it can be configured even when there is no mains power, for example when preping the lighting rig. Pressing the centre button activates the unit giving access to the menu systems. The configuration is stored within the unit. The front panel also includes a label area for marking up the box with a pen if required.

The SnakeSys S6 supports both Art-Net and ACN support, along with ChamNet to allow remote management over the network connection. When in ChamNet mode, the configuration data is stored on board, allowing the device to be restarted. It also has an additional DMX input port on the bottom edge which enables the S6 to work as a stand alone DMX buffer - useful for situations where a truss mount buffer is needed.

Supports Hook Clamp or Omega Clamp. Three mounting points for omega clamps allow the unit to support four different orientations for convenient mounting or hiding within set pieces. Mounting holes are also provided for safety chains and secondary fixings for additional safety or to allow routing of cables. The SnakeSys Stage Box S6 was previously sold as the SnakeSys T2 - but as many of our customers use the product on the stage floor, on floor mounted stands, as well as on the truss we felt Stage Box better reflected its real value as a general purpose Stage Box that can be mounted naywhere, not just on trusses.

ChamSys SnakeSys B4 Four Universe Ethernet to DMX512 Box

The SnakeSys B4 is a four universe DMX to Ethernet convertor. It supports four DMX512 ports that are configurable as either inputs or outputs and one DMX port that is always assigned as an input. The SnakeSys B4 is designed as a multi purpose box to be used in places where a small portable Ethernet to DMX conversion solution is required. The SnakeSys B4 supports both Art-Net and ACN streaming DMX network protocols. The DMX512 ports are fully configurable with DMX packet length, framing rate, and timings. In addition the SnakeSys B4 can operate in a non-network mode as a simple four port DMX buffer.

It can be configured from the front panel using a 4-way DIP switch, and 2 rotary switches. In addition the interface can be set to ChamNet mode, where the SnakeSys B4 is configurable from the MagicQ console, avoiding the need for local configuration. Multiple B4s can be used on a single network, either configured directly from the unit or by using ChamNet control from a MagicQ console. Multiple SnakeSys B4s can be synchronised together to ensure that the DMX output from the console is consistent and does not involve "tearing" either within universes or across multiple universes.

The SnakeSys B4 can be powered from the SnakeSys R4 avoiding the need to run separate power cables. Alternatively, the SnakeSys B4 can be powered directly from mains input on a locking Powercon connector. When connected via network to MagicQ, the SnakeSys B4 unlocks the restricted features of MagicQ such as the full screen Execute Window and remote control.

ChamSys MagicHD Dongle / Rack Mount Dongle Unlocking tool

A USB Dongle that unlocks restricted features in MagicQ / MagicHD. Most features in MagicQ and MagicHD are unlocked when connected to a MagicQ Wing or MagicQ USB Interface. The USB Dongle is useful when no MagicQ Wing or MagicQ Interface is available to unlock these features. The MagicQ dongle also unlocks MagicQ PC to use USB-MIDI devices

ChamSys MagicQ Wall Mount Scene Setter POE

The MagicQ Wall Mount Scene Setter enables control of MagicQ from a remote location using a fixed network connection. The Scene Setter has 4 playback faders and 12 playback buttons, and can be mapped to the wing playbacks on a MagicQ system. An LCD screen shows the legends for the playbacks.

The Wall Mount Scene Setter can be powered from the SnakeSys R4 which features a 3 port POE Switch, thus avoiding the need to run separate power cables. The scene setter can also be powered from any 48v PoE capable network switch that provides power on the unused Cat 5 pairs. If not used with a PoE switch, a Power over Ethernet injector will be required to power the unit.

The MagicQ Wall Mount Scene Setter is ideal for installations and architectural applications, and combined with a MagicQ Rack Mount Console, MQ60 or MQ70 provides a powerful control solution. The MagicQ Wall Mount Scene Setter can also be powered directly from the PoE capable network ports of the MagicQ MQ70 Compact Console.

Note on PC systems MagicQ must be running out of 'demo mode' for the device to work, the system needs either a Rack Mount Dongle, Wing interface or SnakeSys network device connected to unlock MagicQ from 'demo mode'.

ChamSys MagicQ USB Two Universe DMX512 Interface

Connect DMX universes to MagicQ PC, MagicQ Mac and MagicQ consoles with the MagicQ Two Universe DMX512 Interface. Connects via USB and provides two independent DMX512 interfaces. The two uninverses are patchable to any of the 64 Universes available in the MagicQ software. The two DMX outputs are optically isolated from the USB to protect against damage to your PC. DMX framing is generated from within the module, unlike many other dongles, thus giving reliable and secure operation. Highly accurate DMX framing is possible with full 512 bytes frames. The default setting of 33 DMX frames per second provides for accurate stepping of moving lights.

In normal operation the interface is powered from the USB port. A separate 12 volt power input socket is provided for connection to low power USB ports. Can also be used with MagicQ consoles to provide additional DMX outputs. MagicQ Two Universe DMX Interface unlocks the locked features of MagicQ such as full screen Execute Window, iOS/Android remote, remote control, and removes "Demo Mode" from the title bar of MagicQ. Supplied with USB cable.

ChamSys MagicQ Console Dual Colour LED Lamp

The MagicQ Console Dual Colour LED Lamp is for use with MQ100/200/300 Pro 2010 and Pro 2014 consoles.

Also supported by MQ40/60/70, PC Wing Compact and Extra Wing Compact. The dual colour LED (blue) is not supported on, MaxiWing or the older versions of the PC Wing and Extra Wing. Not supported on older MQ100 series consoles.

ChamSys Foot Switch for MagicQ PC Wing v1

Foot Switch for older MagicQ PCWing with DIN connectors for use with MagicQ remote port. MagicQ supports control of Cue Stack stepping, master GO button, DBO, Add/Swap, Tap to Time, automated events and many other features via the remote port.

For PC Wing Compact use the Foot Switch for MagicQ Console / Compact Series which has a MiniDiN connector. Note that the MagicQ MiniWing does not have a remote port.

ChamSys Foot Switch for MagicQ Console / PC Wing Compact

Foot Switch for MagicQ Console (MQ60/MQ70/MQ100/MQ200/MQ300) MagicQ Maxi Wing and MagicQ PC Wing Compact. MiniDIN connector for use with MagicQ remote port.

MagicQ supports control of Cue Stack stepping, master GO button, DBO, Add/Swap, Tap to Time, automated events and many other features via the remote port. Note that the MQ40 does not have a remote port.

ChamSys MagicQ Compact Consoles MQ40 / 60 / 70 Padded Bag

Padded Bag suitable for the MagicQ Compact Consoles MQ40/60/70.

Flight Case for MagicQ Compact Consoles MG40 / 60 / 70

ChamSys flight cases are carefuly designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are manufactured in the UK by BCS Manufacturing using C&C precision machining.

Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products - particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences - our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

Padded Bag for MagicQ MQ80

Padded Bag suitable for the MagicQ MQ80.

Flight Case for MagicQ MQ80 Blue - no wheels

ChamSys flight cases are carefuly designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are manufactured in the UK by BCS Manufacturing using C&C precision machining.

Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products - particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences - our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

Flight Case for MagicQ MQ80 Blue with wheels

ChamSys flight cases are carefuly designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are manufactured in the UK by BCS Manufacturing using C&C precision machining.

Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products - particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences - our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

Flight Case for MagicQ Extra Wing / PC Wing Compact Blue

ChamSys flight cases are carefuly designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are manufactured in the UK by BCS Manufacturing using C&C precision machining.

Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products - particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences - our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

Padded Bag for MagicQ Extra Wing / PC Wing Compact

Padded Bag suitable for the MagicQ Extra Wing / PC Wing Compact.

Flight Case for MagicQ MQ500 Stadium Blue

ChamSys flight cases are carefuly designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are manufactured in the UK by BCS Manufacturing using C&C precision machining.

Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products - particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences - our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

ChauvetDJ Xpress-1024 USB to DMX interface Harness the power of ShowXpress lighting control software with the ChauvetDJ Xpress-1024 DMX interface. This self-contained aluminum unit is compatible with both Windows and Mac OS X systems, but will easily store and play back 1 show without a computer. Xpress-1024 controls two DMX universes and unlocks an additional ArtNet universe (3 universes total). The interface is hot-swappable and automatically re-connects within seconds. Connect multiple interfaces to control additional universes. Xpress-1024 has built-in electrostatic discharge and dual optical isolation protection circuits.

Zero 88 FLX S24 512 - 48 Fixture Single Universe Lighting Control Console offers a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights in your rig. Quickly and accurately control colour changing lights using the multi-touch colour & image picker, the encoder wheels or by selecting colours contained within a “mood” using Mood Boards, and quickly record it straight onto any fader or one of the 48 instant-access colour palettes to recall later.

Zero 88 FLX S48 512 - 96 Fixture Single Universe Lighting Control Console offers a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights in your rig. Quickly and accurately control colour changing lights using the multi-touch colour & image picker, the encoder wheels or by selecting colours contained within a “mood” using Mood Boards, and quickly record it straight onto any fader or one of the 48 instant-access colour palettes to recall later.

Zero 88 FLX S24 1024 - 48 Fixture Two Universe Lighting Control Console offers a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights in your rig. Quickly and accurately control colour changing lights using the multi-touch colour & image picker, the encoder wheels or by selecting colours contained within a “mood” using Mood Boards, and quickly record it straight onto any fader or one of the 48 instant-access colour palettes to recall later.

Zero 88 FLX S48 1024 - 96 Fixture Two Universe Lighting Control Console offers a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights in your rig. Quickly and accurately control colour changing lights using the multi-touch colour & image picker, the encoder wheels or by selecting colours contained within a “mood” using Mood Boards, and quickly record it straight onto any fader or one of the 48 instant-access colour palettes to recall later.

Zero 88 FLX S24 Flight Case designed & built especially for the Zero 88 FLX S24, the FLX24 can be operated whilst it is in the case.

Zero 88 FLX S48 Flight Case designed & built especially for the Zero 88 FLX S48, the FLXS48 can be operated whilst it is in the case.

Chauvet DJ Obey 4, It’s a compact DMX controller for LED wash lights with 3- or 4-channel modes—red, green, blue and white/amber—for easy color-mixing control. It has built-in automated, sound-activated or manual playback options and can control fixtures in four different zones—independently of each other. Its one-touch buttons of pre-mixed colors, built-in chases and strobe and dimmer controls make it perfect for a lighting novice or anyone looking for an easy way to control LED washes.

Chauvet DJ Obey 6, Obey 6 is a universal, compact controller capable of controlling up to 6 channels per fixture. It allows you to control effects by simultaneously operating each fixture in different playback modes, with variable fade times. Increase flexibility with playback options that include manual RGBAW+UV, automated and sound-activated mode. Increase control with adjustable audio sensitivity, strobe, and blackout effects.

Chauvet DJ Obey 40, The Obey 40 is the next step up from the Obey 10, allowing for control of up to 12 fixtures at 16 channels each. With a slightly larger size comes a larger capacity: the Obey 40 has 30 banks on 8 scenes, or up to 240 scenes. The Obey 40 offers the flexibility of its little brother but also adds fog and strobe control and MIDI compatibility.

Chauvet DJ Obey 70, Bigger shows call for more accessibility and ease of programming. The Obey 70 bridges the gap between smaller rack mount controllers and massive control desks. 14 reversible faders and an assignable joystick allow for easy programming of up to twelve 32-channel fixtures. The Obey 70 can store up to 6 sets of chases containing 240 scenes on 384 total channels of control. Also at your fingertips are fog and strobe control as well as MIDI compatibility.

Chauvet DJ Stage Designer 50 48-Ch DMX Console, The Chauvet Stage Designer 50 takes the size of a 24-channel dimming console and the functionality of a 48- channel console and combines the two into one powerful dimming unit. The Stage Designer-50 has up to 8 pages with 12 scenes each and 96,000 programmable steps. The Chauvet stage designer 50 console allows the user to re-assign channels as needed and allows for MIDI input. The Chauvet Stage Designer-50 has the ability to stack scenes for simultaneous or sequential playback.

Chauvet DJ Xpress 512
Xpress 512 is a self-contained DMX-512 interface for the ShowXpress software. The interface is capable of transmitting one universe of DMX and works on both Windows and Mac OS X platforms. Multiple units can be connected for multiple universes of control. Users can store and playback one show without a computer or unlimited shows with a computer.

Daslight DPAD 128 stand alone Glass Pad 128 Stand alone wall mounted DMX controller. Glass panel with 3 Touch-sensitive buttons. 128 DMX output channels. 2K stand alone memory. Micro USB connector. Works with DVC2 and DVC3 software. Delivered with a micro USB cable and installation CDROM including user manual. AC/DC adapter optional. Compatible with Windows XP / Vista / Win 7 32/64-bit.

Daslight DPAD 512, stand alone Glass Pad 512 Stand alone wall mounted DMX controller. New model 86 x 110mm glass panel with 4 Touch-sensitive buttons and display. 512 DMX output channels. 32K stand alone memory. Micro USB connector. USB connection only. This product can not be controlled through ETHERNET and WIFI network. Delivered with a micro USB cable and installation CDROM including user manual. AC/DC adapter optional.

Daslight DPAD 512 Powerful, versatile and pretty damn good looking Stand alone wall mounted DMX controller. The DPAD 512 offers a solution for the taller US gang boxes. It provides the value for money of the DPAD 128 along with 99 scenes, 512 channels, a larger stand alone memory and a digital display. Perfect for single zone installations such as RGB strips in a kitchen, lights underneath a bar, on the outside of a cruise-liner, a pool, the list goes on...

Daslight DPAD Gold, stand alone Glass Pad GOLD Stand alone wall mounted DMX controller. 106 x 146mm glass design with touch-sensitive buttons, color / dimmer / speed palette and graphic color display. 2 DMX OUT universes (1024 channels). USB+ETHERNET connection. Multi-zone memory. Trigger from RS232, PORTS, infra red, clock/calendar. Delivered with a USB cable and installation CDROM including user manual. AC/DC adapter and Infrared remote control optional. Compatible with Windows XP / Vista / Win 7 32/64-bit.

Daslight Virtual controller DVC FUN

The Daslight DVC Fun is a controller that translates signals from the Daslight 4 software package into DMX signals that your lighting fixtures can understand. As the entry-level model, the Fun has access to 128 DMX channels, but it can be upgraded if the need arises. That way, your controller can grow along with your increasing need for more channels. It also has an internal memory that enables you to use it as a standalone device. This allows you to load up a show you've previously created, so that you can start it up without the need for a computer - a great backup for live use or small-scale shows.

Daslight Virtual Controller DVC4 GOLD

The Daslight DVC4 Gold is a USB interface that can be used with the Daslight 4 lighting control software. This Gold version of the interface gives you access to the software's full functionality, and does not limit the number of steps per scene or the number of scenes that can be used simultaneously. Create professional light shows and light plans that you can control on location with a laptop, or even a tablet or smartphone by installing the free to download software with this interface. The DVC4 Gold has an extensive library of over 15,000 fixtures on board

Daslight Virtual controller DVC4 GOLD ZM

Giving access to 3,072 DMX channels the DVC4 GZM is the highest spec of the the DVC4 series of interfaces. Half of the channels work via the DMX output, while the other half work via Artnet when you use your computer's Ethernet connector. In addition to the mini USB connector, the interface also has an RJ45 connector that can be used as an alternative for USB, allowing you to control the interface with your smartphone or tablet when it's in standalone mode. This interface has both a 3-pin and a 5-pin connector plus a micro SD card slot, allowing you to load light shows onto the DVC4 GZM so that it can run them in standalone mode on location.

Mini LED Gooseneck lamp BNC High quality gooseneck lamp with 4 bright LED

Mini LED Gooseneck lamp XLR, High quality gooseneck lamp with 4 extreme bright LED.

ADJ USB LITE - USB Gooseneck Light, Long life LED gooseneck light. Can be used with any standard USB products including ADJ Elation controllers with a USB light plug

The Citronic GL12X Gooseneck Lamp with XLR Connection is a lamp on a flexible gooseneck to illuminate mixers, turntables, 19 inch racks and other types of equipment. It is powered by the unit to which it is connected.

The Citronic GL12B Gooseneck Lamp with BNC Connection is a lamp on a flexible gooseneck to illuminate mixers, turntables, 19 inch racks and other types of equipment. It is powered by the unit to which it is connected.