NJD Lighting Equipment

NJD Datamoon Hand Held Controller

Hand controller for use with the NJD Datamoon featuring Colour/Gobo change, colour change time control, programme, programme speed and rotation speed.

NJD Spectre Colour Mixing Floodlight

NJD Quartet Four Colour Floodlight Designed to provide the maximum amount of light with the minimum of complexity, the QUARTET has the equivalent light output of four 500 Watt lamps - but only uses 300 watt filaments and is fitted with four dichroic filters, blue, red, amber and green. Requiring only a mains input per channel the QUARTET can be connected to any standard lighting controller to provide bright and efficient stage lighting. All four channels lit simultaneously provides 2000 Watts of white light (All four colours mixed produces white).

NJD Spectre / Quartet, replacement Dichroic Filters. Supplied in 75mm Glasssquares. Note glass must be glued in place with a high temperature Silicone adhesive see link below.

High Temperature Silicone adhesive to be used in conjunction with the NJD and iSolution 3 & 4 replacement Dichroic Filters. This adhesive allows the metal-work to expand without cracking the glass and will withstand the high temperatures that are see on the glass filters. Supplied in 90ml tubes.

NJD Star Cloth and LED Decor Controller

Easy to use controller for use with the NJD star cloth and LED Decor range of products. The unit features controls for brightness, speed, soft fade, and a selection of pre-programmes.

NJD IF32 DMX INTERFACE. The IF32 enables the conversion of a standard DMX signal to 2 sets of 16 analogue outputs of 0-10 Volts. Powered from any NJD power pack, the IF32 requires no mains power supply and will allow each set of 16 outputs to be assigned to any 16 consecutive DMX addresses. Supplied in a 1U rack mount case with all external connections the IF32 features in/out DMX jack sockets allowing it to be introduced at any point in the DMX signal supply line.

NJD RJ11 to 5 Pin XLR Lead 5M, High quality lead to connect NJD hand controllers to NJD lighting products with 5 pin XLR inputs.