PCB LED Strips and LED Foils

Flexoled FTP3HP RGB Driver, The FTP3HP RGB LED DMX Driver is suitable for most types of 24V RGB flexible colour tapes requiring constant voltage control. After connecting RGB LED tape with this controller you can utilise the manual dimming mode or built-in programs via the on-board dipswitches. Further control can be facilitated by the units DMX input.

Visio TRI-RGB60 Flexible Tri-colour Strip IP65 Silicone Jacket, The TRI-RGB60 Flexible Tri-colour Strip from Visio features 300 vibrant SMD 5050 Tri-colour LEDs per 5 metre roll. The IP65 rated protective silicone jacket gives a bright constant smooth effect and can be fitted where a continuous linear halo of light is required. Supplied complete with fixing clips, jointing caps and adhesive.

Visio TRI-RGB60 Flexible Tri-Color Strip (5M roll), The TRI-RGB60 Flexible Tri-Color Strip from Visio features 300 vibrant SMD Tri-colour LEDs per 5 metre roll. The IP-54 rated protective resin coating gives a bright constant smooth effect and can be fitted where a continuous linear halo of light is required.

Visio TRI-RGB60 Flexible Tri-Color Strip (5m roll), Black PCB, The TRI-RGB60 Flexible Tri-Color Strip from Visio features 300 vibrant SMD Tri-colour LEDs per 5 metre roll. The IP-54 rated protective resin coating gives a bright constant smooth effect and can be fitted where a continuous linear halo of light is required.

Visio QUAD-RGBW60 Flexible Quad-colour Strip (5m roll), The QUAD-RGB60 Flexible Quad-colour Strip from Visio features 300 vibrant SMD Quad-colour LEDs per 5 metre roll. The IP-54 rated protective resin coating gives a bright constant smooth effect and can be fitted where a continuous linear halo of light is required.

Visio TRI-RGB Flexible Tri-Color Strip FLS-RGB (5M roll), The FLS Color Strips are available in various individual colours or this tri-colour strip featuring 150 tri-colour LEDs per 5 metre roll. The strip can be cut every 5 LEDs (167mm). These colour strips are ideal for cove or back-light applications. 

Visio UV Flexible Color Strip FLS-UV, The FLS-UV Flexible, mega bright ultra violet strip from Visio features 300 vibrant SMD 5050 tri-chip LEDs per 5 metre roll. The IP-54 rated protective resin coating gives a bright constant smooth effect and can be fitted where a continuous linear halo of black light is required.

Visio Green Flexible Color Strip FLS-G (5M roll), The FLS Color Strips are available in various individual colours or an all in one RGB strip. These Ultra Bright colour strips are ideal for cove or back-light applications.  

Visio Blue Flexible Color Strip FLS-B (5M roll), The FLS Color Strips are available in various individual colours or an all in one RGB strip. These Ultra Bright colour strips are ideal for cove or back-light applications.  

Visio Cool White Flexible Color Strip FLS-CW (5M roll), The FLS Color Strips are available in various individual colours or an all in one RGB strip. These Ultra Bright colour strips are ideal for cove or back-light applications.  

Visio Warm White Flexible Color Strip FLS-WW (5M roll), The FLS Color Strips are available in various individual colours or an all in one RGB strip. These Ultra Bright colour strips are ideal for cove or back-light applications.  

LEDJ Flexoled FTP3 RGB LED DMX Driver, The FTP3 RGB LED DMX Driver is suitable for most types of 12-24V RGB flexible colour strips requiring constant voltage control. After connecting a RGB LED Strip(s) with this RGB controller you can utilise the manual dimming mode or built-in programs via the on-board dipswitches. Further control can be facilitated by the units DMX input. The driver can also be used for 3 channels of single colour LED tape.

LEDJ Flexoled FTP4 RGBW LED DMX Driver, The FTP4 RGBW LED DMX Driver is suitable for most types of 12-24V RGBW flexible colour strips requiring constant voltage control. After connecting a RGBW LED Strip(s) with this RGBW controller you can utilise the manual dimming mode or built-in programs via the on-board dipswitches. Further control can be facilitated by the units DMX input. The driver can also be used for 4 channels of single colour LED tape.

LEDJ Flexoled FTP1 Single Channel LED DMX Driver, The FTP1 single channel LED DMX Driver is suitable for most types of 12-24V flexible strips requiring constant voltage control. After connecting an LED Strip with this single channel controller you can utilise the manual dimming mode or for integration into larger systems the DMX or 0-10V inputs may be used.

Visio Meanwell RSP-150-24 150W 24V DC Power Supply, 24V power supply for Visio and LEDJ fixed installation architectural LED products. Designed for use with drivers such as the FTP and SDV series, the RSP-150-24 is built into a 30mm high chassis suitable for installation into 1U cabinets.

24VDC 25W Power Supply, Switch Mode mains - 24V DC power supply.

• Compact auto-switching 110/220v AC - 24V DC
• 25 watt
• 2 Wire connection between Power Supply and LED Driver

24VDC 100W Power Supply, Switch Mode mains - 24V DC power supply.

• Compact auto-switching 110/220v AC - 24V DC
• 100 watt
• 2 Wire connection between Power Supply and LED Driver

24VDC 150W Power Supply, Switch Mode mains - 24V DC power supply.

• Compact auto-switching 110/220v AC - 24V DC
• 150 watt
• 2 Wire connection between Power Supply and LED

Visio Meanwell HLG-150H-24A 150W 24V DC Power Supply/Driver 24Vdc, 150W power supply for the Visio LEDJ flexible LED tape. Designed for use with drivers such as the FTP and SDV series.

24VDC 220w Power Supply, Switch Mode mains - 24V DC power supply.

• Compact auto-switching 110/220v AC - 24V DC
• 220 watts
• 2 Wire connection between Power Supply and LED Driver

Visio 300W 24V DC Power Supply, 24Vdc, 300W power supply for the Visio LEDJ flexible LED tape. Designed for use with drivers such as the FTP and SDV series.

24VDC 600w Power Supply, Switch Mode mains - 24V DC power supply.

• Compact auto-switching 110/220v AC - 24V DC
• 600 watts
• 2 Wire connection between Power Supply and LED Driver

Flexoled Tri Colour 5m LED Strip Install Kit, The FlexoLED 5m tri colour LED install pack is supplied complete with 5m (150 LEDs) RGB strip, a controller with 24 key IR remote and mains power supply ready for installation. These ultra bright colour strips have an IP-54 rated protective resin coating and give a bright constant smooth effect and can be fitted where a continuous linear halo of light is required.

LTC22IR RGB LED Tape Controller with 24 Key IR Remote

RGB controller for LED tape operated by an IR remote control for selecting the static colour, brightness or colour changing operating mode.

LTC35DMX Professional LED Tape Controller with 35 Mode & DMX

A professional LED tape controller with 35 stand alone modes of operation whereby the speed and brightness can be adjusted manually. The unit can also be linked to a DMX controller which can control the RGB signals manually on three channels to create a scene or chase sequence. Ideal to control large installations in nightclubs, bars and restaurants.

12V AC-DC 5A Power Supply For LED Drivers, 12V AC-DC 5A Power Supply For LED Drivers.

PS30 Professional Universal 12Vdc Power Supplies

These power supplies are designed to be used by qualified people to install LED tape. Each has a different power output to suit different requirements for each job.

PS40 Professional Universal 12Vdc Power Supplies

These power supplies are designed to be used by qualified people to install LED tape. Each has a different power output to suit different requirements for each job.

PS60 Professional Universal 12Vdc Power Supplies

These power supplies are designed to be used by qualified people to install LED tape. Each has a different power output to suit different requirements for each job.

PS100 Professional Universal 12Vdc Power Supplies

These power supplies are designed to be used by qualified people to install LED tape. Each has a different power output to suit different requirements for each job.

PS150 Professional Universal 12Vdc Power Supplies

These power supplies are designed to be used by qualified people to install LED tape. Each has a different power output to suit different requirements for each job.

Power Supply 300 Watt, 12V DC, 25A

Low voltage switch-mode power supplies for the LED products.

DIY-A60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIY-B60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIY-CW60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIY-DW120 IP65 DIY LED Tape - 5m Dual Colour

Retail ready blister packed dual colour LED tape together with UK adaptor power supply, IR controller and connectors to get started. The tape has an adhesive back and an epoxy coating to protect from damage and also makes it IP65 rated. Use the remote to set what sort of colour output you require such as cool white, warm white, or a mixture of both for a more neutral tone. It is low voltage operated at 12Vdc and the self adhesive backing allows for quick and easy installation in kitchens, bathrooms in either the home, caravan, cars or lorries.

DIY-G60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIYH-RGB30 IP68 DIY LED Tape - 5m Multi-colour RGB

Retail ready blister packed RGB waterproof LED tape together with multi adaptor power supply, IR controller and connectors to get started. The tape is IP68 rated allowing it to be fully submersed in water. It is low voltage operated at 12Vdc and the self adhesive backing allows for quick and easy installation in a variety of places, such as kitchens, bathrooms or ponds in either the home, caravan, cars or lorries.

DIY-PK60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIY-R60 IP65 DIY LED Tape - 5m Single Colour

Retail ready blister packed single colour LED tape supplied with a mains power adaptor and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DIY-RGB30 IP65 DIY LED Tape - 5m Multi-colour RGB

Retail ready blister packed RGB LED tape together with a mains power adaptor, IR controller and connection accessories. The tape has a transparent coating to provide weatherproof protection and can be cut to length as required. Low voltage 12Vdc operation and self adhesive backing allows for quick and easy installation in the home, motor home, or vehicles.

DK3-CW60 3m DIY LED Tape Kits - IP65 Single Colour

Retail ready blister packed LED tape with a mains power adaptor. The tape has an adhesive backing and an epoxy coating to provide IP65 weatherproofing. Low voltage operation makes this tape safe to use around the home and convenient for vehicle or mobile home installation.

DK3-RGB30 3m DIY LED Tape Kit - IP65 RGB

Retail ready blister packed RGB LED tape with multi-region power adaptor. The tape has an adhesive backing and an epoxy coating to provide IP65 weatherproofing. Low voltage operation makes this tape safe to use around the home and convenient for vehicle or mobile home installation.

DK3-WW60 3m DIY LED Tape Kits - IP65 Single Colour

Retail ready blister packed LED tape with a mains power adaptor. The tape has an adhesive backing and an epoxy coating to provide IP65 weatherproofing. Low voltage operation makes this tape safe to use around the home and convenient for vehicle or mobile home installation.

LT12530-RGB 12V RGB LED Tape 5.0m Reel

Super-bright IP65 rated RGB LED tape which when connected to a controller can produce any colour of the rainbow. Supplied on 5m reel with an adhesive back this tape is easy to setup and quick to install. Its low voltage supply and low power consumption makes it suitable for a wide variety of applications from homes to vehicles and from shops to bars and nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task.

LT12530-RGBW 12V Quad Colour RGBW LED Tape - 5m Reel

5m reel of LED tape fitted with SMD5050 quad colour LEDs. The flexible tape is protected by a clear IP65 coating and can be easily installed using the self-adhesive backing. The 5m length is terminated at each end with a 5 way connector for red, green, blue, white and +12V. For custom fitting, the tape has regular cutting points which can be re-soldered to additional lengths of tape if required. Powering through a 4 colour controller will provide full colour mixing with an additional component for pure white or true pastel shades.

LT12560-BL 12V Single Colour LED Tape - 5m Reel

A range of IP65 single colour, super-bright LED tapes; supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the low voltage supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT12560-CCT 12V Warm & Cool White LED Tape - 5m Reel

5m reel of LED tape with 60 x SMD5050 dual colour LEDs per metre with mixable warm and cool white colour output. Cutting points at every 5cm for custom lengths. 12Vdc power in and out connections are via locking DC5521 jacks. Can be connected to 2 switches or combined with a 2 colour controller for variable Correlated Colour Temperature (CCT).

LT12560-CW 12V Single Colour LED Tape - 5m Reel

A range of IP65 single colour, super-bright LED tapes; supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the low voltage supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT12560-RD 12V Single Colour LED Tape - 5m Reel

A range of IP65 single colour, super-bright LED tapes; supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the low voltage supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT12560-RGB 12V RGB LED Tape 5.0m Reel

Super-bright IP65 rated RGB LED tape which when connected to a controller can produce any colour of the rainbow. Supplied on 5m reel with an adhesive back this tape is easy to setup and quick to install. Its low voltage supply and low power consumption makes it suitable for a wide variety of applications from homes to vehicles and from shops to bars and nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task.

LT12560-RGBW 12V Quad Colour RGBW LED Tape - 5m Reel

5m reel of LED tape fitted with SMD5050 quad colour LEDs. The flexible tape is protected by a clear IP65 coating and can be easily installed using the self-adhesive backing. The 5m length is terminated at each end with a 5 way connector for red, green, blue, white and +12V. For custom fitting, the tape has regular cutting points which can be re-soldered to additional lengths of tape if required. Powering through a 4 colour controller will provide full colour mixing with an additional component for pure white or true pastel shades.

LT12560-UV 12V UV LED Tape - 5M Reel

5m reel of high output LED tape with 60 x SMD5050 LEDs per metre. Light output is a bright visible violet colour which can make certain materials fluoresce at close range, giving an ultraviolet effect. The tape is protected with a clear IP65 coating and has a self-adhesive backing for easy installation. Cutting points are provided at every 5cm for custom lengths. 12Vdc power in and out connections are via locking DC5521 jacks. Designed to produce UV effects for glow parties, themed events and displays.

LT12560-WW 12V Single Colour LED Tape - 5m Reel

A range of IP65 single colour, super-bright LED tapes; supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the low voltage supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT12560-YW 12V Single Colour LED Tape - 5m Reel

A range of IP65 single colour, super-bright LED tapes; supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the low voltage supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT245120-CW 24V High Output LED Tape - 5m Reel

24V LED tape with high luminous flux output. 120 LEDs per metre combine to give exceptional light output with narrow spacing for even light distribution. Epoxy coated for water resistant protection and self adhesive backing for easy installation. Where standard LED tapes may not be powerful enough, these high output versions offer sufficient illumination for cabinets, architectural detail and signage.

LT24530-RGB 24V RGB LED Tape - 5m Reel

Super-bright IP65 rated RGB LED tape which when connected to a controller can produce any colour of the rainbow. Supplied on 5m reel with an adhesive back this tape is easy to setup and quick to install. Its 24Vdc supply and low power consumption makes it suitable for a wide variety of applications from homes to vehicles and from shops to bars and nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task.

LT24560-BL 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-CW 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-GN 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-PK 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-RD 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-RGB 24V RGB LED Tape - 5m Reel

Super-bright IP65 rated RGB LED tape which when connected to a controller can produce any colour of the rainbow. Supplied on 5m reel with an adhesive back this tape is easy to setup and quick to install. Its 24Vdc supply and low power consumption makes it suitable for a wide variety of applications from homes to vehicles and from shops to bars and nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task.

LT24560-WW 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

LT24560-YW 24V Single Colour LED Tape - 5m Reel

Our range of IP65 single colour, super-bright LED tapes are supplied on 5m reels with a choice of 7 different colours, each with an adhesive back. The tape is easy to setup and quick to install, the 24Vdc supply and low power consumption makes them suitable for a wide variety of applications from homes to vehicles, shops to bars and even nightclubs. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, this makes cleaning an easy task.

RGB12-L Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

RGB12-T Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

RGB12-X Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

SC10-L Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

SC10-T Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

SC10-X Professional LED Tape Connectors

A range of couplers and connectors to aid the installation of Fluxia professional LED tape. L, T and X type connectors available for professional single colour or RGB tape.

RGB10-L DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

RGB10-T DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

RGB10-X DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

SC8-L DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

SC8-T DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

SC8-X DIY LED Tape Kit Connectors

A range of couplers and connectors to aid the installation of Fluxia LED tape kits. L, T and X type connectors available for single colour or RGB DIY LED tape kits.

FITE240-RGB Intelligent RGB LED Tape Kit

This incredible LED tape creates mesmerising and magical colour changing effects. The controller addresses each LED independently to create numerous smooth, fluid, colour changing effects. The tape can be easily extended for longer runs, creating a continuous cascade. The tape is an easy plug and play setup and quick to install using the adhesive backing. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task. Elegant and effortless lighting for homes, vehicles, shops bars & nightclubs.

FITI240-RGB Intelligent RGB LED Tape Kit

This incredible LED tape creates mesmerising and magical colour changing effects. The controller addresses each LED independently to create numerous smooth, fluid, colour changing effects. The tape can be easily extended for longer runs, creating a continuous cascade. The tape is an easy plug and play setup and quick to install using the adhesive backing. The LEDs will last up to 50,000 hours and are covered with an epoxy coating to protect the tape from general wear and tear as well as being water resistant, making cleaning an easy task. Elegant and effortless lighting for homes, vehicles, shops bars & nightclubs.

DIY-4X300-CW LED Tape Decor Kits - Single Colour

DIY LED tape installation kits comprising 4 lengths of self adhesive LED tape with two 90° corner pieces and a 12Vdc power supply with an in-line switch. The tape can be cut to size and re-joined to fit different sizes of trim or frames using the supplied snap-on connectors. The kit offers straightforward LED tape installation without requiring special tools or skills.

DIY-4X300-WW LED Tape Decor Kits - Single Colour

DIY LED tape installation kits comprising 4 lengths of self adhesive LED tape with two 90° corner pieces and a 12Vdc power supply with an in-line switch. The tape can be cut to size and re-joined to fit different sizes of trim or frames using the supplied snap-on connectors. The kit offers straightforward LED tape installation without requiring special tools or skills.

ILA2DC In-line Single Colour LED Tape Amplifier

A miniature in-line repeater amplifier for connection to single colour LED tape. Designed to allow dimming and sequence control of extended runs of tape.

ILADC4 In-line LED Tape Repeater Amplifiers

A range of miniature in-line repeater amplifiers for connection to LED tape. Designed to take advantage of the versatility of LED tape to offer eye-catching effects in a neat and efficient format.

LR15X LR15X Outdoor RGB Amplifier/Repeater

Weatherproof RGB amplifier/repeater for extended chains of voltage controlled LED lighting. From any given LED controller, the number of fixtures which can be connected is determined by the power output of the controller. Beyond this limit, it is necessary to boost the power of the control voltage for each colour. Connecting this amplifier to the end of the chain enables more LEDs to be operated from the same controller, making large arrays of colour mixing lighting possible.

LR30 12-24V RGB Repeater Amp 3x10A

RGB repeater/amplifier for 12V or 24V LED tape installation with up to 10A output capacity per colour. Designed to enable extended runs of RGB tape from a single controller

BIC3 Bluetooth Intelligent LED Tape Controller

An in-line controller enabling full control of Fluxia intelligent LED tape via Bluetooth from a smartphone or tablet. The associated ColorStream app is available for iOS and android devices, offering direct access to 16 million static colours and 99 dynamic programs. Provides a convenient way to control the full feature set of Fluxia RGB intelligent LED tape.

BTC1 Bluetooth RGB LED Controller

Control colour changing LED tape from your smartphone. Once the RayColor app is installed on your device, instructions are sent from the smartphone to the controller via Bluetooth signal. 16 million static colours and 42 dynamic modes to choose from.

BTC3 Bluetooth RGB LED Tape Controller

Bluetooth controller to operate RGB LED tape from a smartphone using the ColorEasy3 Plus app for android or iOS. Choose from 16 million static colours or 42 dynamic programs, which can be stored into 16 internal memories.

DMX15RGB 12-24V DMX RGB Controller 3x5A

DMX decoder for 12V or 24V RGB LED tape. DC power input and colour channel outputs are connected via screw terminals. DMX input and through connection are via RJ45 sockets with the start address set by side mounted DIP switches. Powered by a 12V or 24V power supply, this decoder enables 3 channel DMX control of Red, Green and Blue output

IMDC1 In-line RGB LED Tape Controller

In-line low voltage RGB LED tape controller with 3 button control for static colours and internal sequence programs. Convenient DC jack power connection with 4-pin RGB output in a compact and easy-to-use format.

ISDC1 In-line Single Colour LED Tape Controller

In-line low voltage single colour LED tape controller with 3 button control for dimming and internal sequence programs. Convenient DC jack input and output connections in a compact and easy-to-use format.

ISRF1 In-line RF Single Colour LED Tape Controller

In-line controller for low voltage single colour LED tape with DC jack input and output. Controlled via the supplied handheld RF remote control with access to dimming and built-in pattern programs for dynamic displays and mood lighting applications.

LTC44IR RGB Tape Controller with 44 Key IR Remote

RGB controller for LED tape operated by an IR remote control for selecting the pre set static colours, manual RGB colour adjust or run one of 6 different chase modes: Colour change, colour fade and more with manual speed control to suit your environment.

PIR96 PIR Detector for Single Colour LED Tape

A PIR movement detector for use with single colour LED tape. Power is passed through when movement is detected within the sensor field of view and stays on until no movement is detected for 30 seconds. Fitted with 5.5mm connectors for power input and LED output, self-adhesive pad and screw slots for fixing allowing for easy installation.

RFCW2 2-colour LED Tape RF Controller

In-line controller for dual-colour LED tape. Power input is connected to a DC5521 jack and controlled output is delivered to a 4-pin connector for connection to the tape. Alternatively, 2 pairs of output wires can be split to control 2 completely separate tapes in a custom installation. Static colour is set by the supplied RF handset with options for on/off, brightness and colour temperature. Convenient wire-free operation to enable the user to set LED tape colour for various lighting requirements or moods.

RFQ5 RF RGBW LED Tape Controllers

In-line RF controllers for 4-colour RGBW LED tape. Power input is connected to a DC5521 jack and controlled output is delivered to a 5-pin connector for connection to the tape. Available as a 433MHz master version with handheld remote control or a 2.4GHz slave version, which can be independently controlled via the master controller in 3 groups. Designed to enable full RGB colour mixing with separate control for white output to provide variable pastel shades.

SLQ5 RF RGBW LED Tape Controllers

In-line RF controllers for 4-colour RGBW LED tape. Power input is connected to a DC5521 jack and controlled output is delivered to a 5-pin connector for connection to the tape. Available as a 433MHz master version with handheld remote control or a 2.4GHz slave version, which can be independently controlled via the master controller in 3 groups. Designed to enable full RGB colour mixing with separate control for white output to provide variable pastel shades.

PS100-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS150-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS200-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS300-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS30-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS45-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

PS60-24 Universal 24Vdc Power Supplies

A range of IP66 rated 24Vdc power supplies, available from 30W to 300W output power, suitable for both indoor and outdoor lighting installation. For Professional Use Only.

BTD2 Bluetooth LED Tape Dimmer

Bluetooth controller to operate single colour LED tape from a smartphone using the ColorEasy1 Plus app for android or iOS. Dimming levels can be stored into 16 internal memories.

ILDC2 Single Colour LED Tape Dimmer

Miniature DC in-line dimming controller for connection between a power supply and single colour LED tape. A simple 2-wire control lead can be connected to any momentary push switch to provide full on/off and dimming control.

TD1275PSU Triac Dimmable 12Vdc PSU 75W

12Vdc power supply which can be fed from a standard TRIAC leading edge dimmer control. The output is PWM modulated based on the mains power input to provide dimming whilst maintaining a constant 12V output up to 75W power. Designed to enable single colour 12V LED tape to be incorporated into a standard dimming circuit.

LT245120-WW 24V High Output LED Tape - 5m Reel

24V LED tape with high luminous flux output. 120 LEDs per metre combine to give exceptional light output with narrow spacing for even light distribution. Epoxy coated for water resistant protection and self adhesive backing for easy installation. Where standard LED tapes may not be powerful enough, these high output versions offer sufficient illumination for cabinets, architectural detail and signage.

Flexoled Connectors – 2 Wire to LED Strip (Pack of 10),

Flexoled Connectors – 2 Wire LED Strip to Strip (Pack of 10),

Flexoled Connectors – 4 Wire to LED Strip (Pack of 10),

Flexoled Connectors – 4 Wire LED Strip to Strip (Pack of 10),

Flexoled Connectors – 5 Wire to LED Strip (Pack of 10),

Flexoled Connectors – 5 Wire LED Strip to Strip (Pack of 10),

10m 4 Core 22AWG Cable, – Connectors supplied in packs of 10|- Cables supplied in 10m rolls|- Simple to use, no solder required

10m 5 Core 22AWG Cable, – Connectors supplied in packs of 10|- Cables supplied in 10m rolls|- Simple to use, no solder required

LEDJ 10m 2 Core 22AWG Cable