0127186222101271862221

J. P. Leisure Ltd. Unit 1, Hillside Road, Hele, Ilfracombe, Devon, EX34 9QS, United Kingdom.

logo J.P. Leisure Ltd   For All Your Lighting & Sound Needs in the Leisure / Entertainment Industry. Offering the best deals on Professional / Disco Lighting, Sound & Pro Audio equipment. Direct distribution from Manufacturers.  Need Help & Advice, Just Give Us a Call 01271 862221, Phone lines 9.30am - 5pm, Monday to Friday ,E-mail & Online Orders 24/7

My Cart

Items:  items
Value: 

DBX 223XS Stereo 2-Way/Mono 3-Way Crossover

DBX 223XS Stereo 2-Way/Mono 3-Way Crossover

DBX 223XS Stereo 2-Way/Mono 3-Way Crossover

Price Each 132.43 Exc VAT or (158.92 Inc VAT at 20%)

.

Ref: JP65152

<Back

Click Here For PDF User Manual

DBX 223XS Stereo 2-Way/Mono 3-Way Crossover, Lets take a look at the construction features of the dbx 223XS. As you turn the controls you will notice that these units are extremely well built. The controls exude great precision, and the feel is a solid click. Also, when you open the box, you wont find the external power supply that accompanies most processors in this price range. Thats because we know how difficult external power supplies can be to work with and even though it costs a little more, we put the high quality power supply right in the unit. All the inputs and outputs are balanced XLRs that are screwed directly to the chassis. This connection of the jacks to the chassis insures that even if someone stomps on a cable plugged into the unit, its not going to tear up the circuit board inside. All dbx crossovers feature Linkwitz-Riley 24dB per octave filters, the professional standard. But then again, what did you expect?

Via a switch on the back panel, you first select whether youre operating your system in stereo 2-way or mono 3-way. Then you also set, on the back panel, whether or not you want to mono sum the LF (subwoofer) out. (Most systems that use a subwoofer are mono subbed to take advantage of amplifier power and because low frequencies are non-directional.) Back panel switches allow you to select the range of the crossover frequencies individually for both channels. The crossover frequency controls have a green LED that indicates when the x10 switch on the back panel is activated (we wouldnt make you check the switch position on the back every time you wonder where its set). All these switches are on the back panel because it could be disastrous if you were to change them mid-program. On the front panel youll notice there are LEDs that indicate whether the unit is in mono or stereo mode. Each channel has an input gain control for proper level setting. Theres a recessed 40 Hz low cut (HPF) on each channel to remove unwanted low frequencies. Both the low and high outputs on each channel have a gain control ranging from -infinity to +6 dB to allow muting of individual outputs and for level matching. Also, these outputs each have phase reverse switches that will help get you out of a bind without having to reconfigure your system. These phase reverse switches may be internally reconfigured as mute switches. The new Silver Titanium look make them stand out in an audio rack

Youll get great performance, all the features youd expect from a professional product and the knowledge that youre buying a processor from the people that have been producing the worlds finest processors for over 25 years. The technology that made us famous brings you a dbx crossover that has been tested to the highest professional standards at a price thats just too low to admit!

  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
Input Connectors XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced >50k ohm, unbalanced >25k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors XLR
Output Type Impedance-balanaced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohms or greater
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response < 3 Hz to > 90 kHz, +0/-3 dB
Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output)
Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)
Dynamic Range > 106 dB, unweighted, any output
THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz
Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch Inverts the phase at the output, one switch per output.
x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch Selects stereo/mono and 2/3-way operation
LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
Operating Temperature 32F to 113F (0C to 45C)
Power Consumption 15W
Power Connector IEC receptacle
Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight 3.7 lbs. (1.7 kg)
Shipping Weight 5.4 lbs. (2.5 kg)

Related products:

  1. DBX 223S Stereo 2-Way/Mono 3-Way Crossover DBX 223S Stereo 2-Way/Mono 3-Way Crossover
    132.43 Exc VAT or (158.92 Inc VAT at 20%) (Ref: JP65150)

  2. DBX 234S Stereo 2/3 Way, Mono 4-Way Crossover DBX 234S Stereo 2/3 Way, Mono 4-Way Crossover
    142.91 Exc VAT or (171.49 Inc VAT at 20%) (Ref: JP65151)

  3. DBX 234XS Stereo 2-Way Mono 3-Way CrossoverDBX 234XS Stereo 2-Way Mono 3-Way Crossover
    176.86 Exc VAT or (212.23 Inc VAT at 20%) (Ref: JP65153)

Please select next action

Go back or Go to wish list

Recently Viewed