JBL AW595-BK - High Power Two-Way All Weather Loudspeaker (Black)
High Power, Lightweight, 2-way, Full-range Loudspeaker. 15 inch Differential Drive LF, 3 inch Voice Coil Compression Driver. 90° X 50° Rotatable PT Waveguide. 600W Continuous. 100dB Sensitivity. 400W 70/100V Transformer Included. Heavily Braced Fibreglass Enclosure.
The AW595 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H-1 380 mm (15 inch) low-frequency driver and 2432H high-frequency 38 mm (1.5 inch) exit, 75 mm (3 inch) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 90° x 50° coverage. The waveguide is rotatable so the loudspeaker system can used in either the vertical or horizontal orientation. The system is equipped with a 400 W 70/100V transformer.
A heavy-duty stainless steel U-type mounting bracket is included and allows for easy installation on flat surfaces or in 9° corners. The enclosure is constructed of multilayer glass composite and is heavily braced to maximize lowfrequency performance. The 14-gauge stainless steel grille, backed with open cell foam and stainless steel mesh, provides excellent protection in the harshest environments.
The AW595 is part of JBL's AE Series, a versatile family of loudspeakers intended for a wide variety of applications.
Weather-Resistant, All Fiberglass Enclosure
90° x 50° Coverage
2265H-1 Differential Driver Low-Frequency Driver
2432H High Frequency Compression Driver
Large PTT Progressive Transition waveguide for excellent pattern control and low distortion
Rotatable wave guide for vertical or horizontal orientation
Available in Gray and Black finish
400 W, 70/100V Transformer Included
U-type Mounting Bracket Included
Enclosure Hand-Laminated Fiberglass, gray gelcoat (black available)
Suspension Attachment 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
Grille Three layer grille assemblies consisting of 14-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 inch) spade lugs.
Environmental Specifications IP56 per IEC 529
Dimensions (H x W x D in vertical cabinet orientation) 485 x 810 x 478 mm(19.1 x 31.9 x 18.8 inch)
Net Weight 28.3 kg (62.5 lb)
Frequency Range (-10 dB) 35 Hz - 20 kHz
Frequency Response (±3 dB) 55 Hz - 19 kHz
Coverage Pattern 90° x 50°, rotatable waveguide
Directivity Factor (Q) 12.6
Directivity Index (DI) 11 dB
Crossover Frequency 1.2 kHz
Long-Term System Power Rating (IEC) 600 W (2400 W peak), 100 hrs
Maximum SPL 128 dB-SPL cont avg (134 dB peak)
System Sensitivity (1W @ 1m) 100 dB SPL
70V/100V Transformer Taps 70V: 400 W, 200 W, 100W100V: 400W, 200W
Low Frequency Driver 1 x JBL 2265H 380 mm (15 inch) Differential Driver driver with 75 mm (3 inch) dual voice coil
LFD Nominal Impedance 8 ohms
LFD Sensitivity (1W @ 1m, within operational band) 98 dB SPL
High Frequency Driver JBL 2432H, 38 mm (1.5 inch) exit compression driver, 75 mm (3 inch) voice coil
HFD Nominal Impedance 8 ohms
HFD Sensitivity (1W @ 1m) 113 dB SPL