LEDJ 6 x 3m Video Cloth System (inc. Flightcase) allows creation of video effects with flexible, lightweight drapes. Display low to medium resolution still images, videos, and flash animations. Individual images can be configured across multiple drapes with single control to produce large animated surfaces. The curtains are finished with hook and loop fasteners for easy panel joining in any direction. The system comes supplied with animation cloth, power boxes, main controller and sub controller all inside a heavy duty flight case. The included controller allows connection of an additional 7 cloths

LEDJ 6 x 3m Video Cloth (inc. Flightcase) Additional LEDJ Animation cloth for connection to the LEDJ Animation system (Order code:JP63210). Cloth comes supplied with power boxes and heavy duty flight case.

Chauvet Pro EPIX BarTour is a pixel-mapping 1-meter LED bar, featuring 150 LEDs in three rows and a 125 degrees viewing angle. Use the EPIX Drive 900 to power and control it on Art-Net, Kling-Net, or sACN (streaming ACN).

Chauvet Pro EPIX Strip Tour is a pixel-mapping 1-meter LED strip,featuring 50 LEDs in a row and a 125-degree viewing angle. Power and control it through the EPIX Drive 900 on Art-Net, Kling-Net, or sACN (streaming ACN). For added versatility and more creative options, a dome accessory is available to widen the viewing angle to up to 180 degrees.

Chauvet Pro EPIX Strip Tour 50 is a pixel-mapping ½ meter LED strip fixture, featuring 25 LEDs in a row. Power and control it through the Épix Drive 900 on Art-Net Kling-Net or sACN (streaming ACN). For added versatility and more creative options, a dome accessory is available to widen the viewing angle.

Chauvet Pro Épix Strip IP 50 is an IP65 outdoor-rated pixel-mapping ½ meter LED strip fixture, featuring 50 LEDs. Ideal for use in tight spaces, this versatile fixture also comes with dome and flat accessories and stunning pre-built content to allow you to easily configure and program shows in minutes with minimum time/effort. Power and control it through our new Épix Drive 2000 IP on Art-Net, Kling-Net, or sACN (streaming ACN).

Chauvet Pro Épix Strip IP is an outdoor pixel-mapping 1-meter LED strip, featuring 100 LEDs in a row, ideal for festivals, concert touring, and installations. Power and control it through the Épix Drive 2000 IP on Art-Net, Kling-Net, or sACN (streaming ACN). Quickly and easily configure and program shows in minutes with minimal time/effort to create stunning looks. For added versatility and more creative options, dome and flat accessories are included.

Chauvet Pro EPIX Strip Dome Accessory for use with the EPIX Strip Tour to increase the viewing angle up to 180 degrees.

Chauvet Pro Épix Drive 2000 IP is IP65 for indoor or outdoor events, and hosts the processing and power supply for the Épix Tour system. It supports 20 Épix Strip IPs, 36 Épix Strip Tours or 12 Épix Bar Tours, or any combination of the three, with a maximum capacity of 2000 LEDs. Épix Drive 2000 IP supports Art-Net, Kling-Net, and sACN, giving you a variety of control options . Thanks to an integrated web server, you can remotely diagnose, troubleshoot, and change settings as needed without having to directly access the Épix lights. Using the new 17 operating mode you can quickly and easily configure and program shows in minutes with minimal time/effort to create stunning looks.

Chauvet Pro EPIX Drive 900 hosts the processing and power supply for the EPIX Tour system. It supports either18 EPIX Strip Tours or 6 EPIX Bar Tours, or any combination of the two, with a total capacity of 900 LEDs. EPIX Drive 900 supports Art-Net, Kling-Net, and sACN, giving you a variety of control options .Thanks to an integrated web server, you can remotely diagnose, troubleshoot, and change settings as needed without having to directly access the EPIX lights.

Chauvet Pro F3 is a 3.9mm pitch 1 m x 0.5 m LED video panel equally suited for installations and rentals. It runs on the Novastar control protocol and is fully front & rear serviceable with easily accessed magnetic LED modules. The panels may be mounted directly on a flat wall due to the front-service option. The panel features powerful magnets in the frame which assist with hanging the panels.

Chauvet Pro F4IP is an IP65 outdoor-rated video panel with brilliant SMD 1921 LEDs and a pixel pitch of 4.8 mm. With 5,000 NITS (4,500 NITS calibrated), video images stand out even in broad daylight. Flexibility of use is optimized by an advanced light-weight magnesium housing, magnetic modules for quick front & rear serviceability, and magnetic assisted hanging. The innovative design of this 4.8mm panel will allow you to use the F4IP both indoors and outdoors, which is ideal for the rental market.

Chauvet Pro RB-100CM is available for hanging F-Series video panel products from truss or pipe with ease. The RB-100CM ships with M20 eyebolts, and is ideally used with 5/8” shackles for quick and easy installation. The RB-F100CM works seamlessly with the Chauvet 50cm Rig Bar: RB-F50CM.

Chauvet Pro F3 module replacement tool

Chauvet Pro VIP Drive 43Nova is a streamlined all-in-one video wall mapper/scaler/switcher for use with the Novastar video control protocol. With 4 inputs, 3 outputs and a preview monitor, it will map your video wall, scale/switch your video source, and allow remote triggering via DMX, eliminating the need for individual mappers, scalers, and video switchers. HDCP support and EDID management further improve the flexibility of the VIP Drive 43Nova.

Chauvet Pro Unshielded 4-pin XLR Extension, 16 in for Epix Tour series

Chauvet Pro Unshielded 4-pin XLR Extension, 5 ft for Epix Tour series

Chauvet Pro Unshielded 4-pin XLR Extension, 50 ft for Epix Tour series

Chauvet DJ Vivid 4x4 Pack is a modular video panel vividly displays content without the need of bulky media servers. Create dazzling video displays with these lightweight video panels that feature Black body LEDs that accurately reproduce high-contrast videos. Vivid 4 makes a perfect DJ façade and seamlessly integrates with Serato for displaying music videos to add gig excitement. Set up is easy and fast with multiple magnets and positioning pins that make getting up and running tool-free and effortless. Stellar reliability and quality are built into Vivid 4. Dual power supplies ensure downstream panels don’t lose signal. Intelligent modules with dedicated memory improve the image quality and simplify maintenance. Panels can be suspended vertically or horizontally offering different aspect ratio options. Multiple Speego connectors mean Vivid 4 sets up twice as fast as other panels.

The ADJ MCTRL-300 is a controller for ADJ's AV6 LED video panels. It features one DVI signal source input and two RJ45 pixel-data outputs for 2 independant screens. The controller is easily configured via USB and it will drive up to 1.3 million pixels supporting the following resolutions: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668.  The MCTRL-300 is an essential accessory for the AV6 video panels.

ADJ AV4IP is a high resolution, flexible video panel. Each panel has a pixel pitch of 4.81mm with a configuration of a 3-in-1 RGB SMD1921 LED's. The panel is IP65 on the front and IP54 on the back, which allows for temporary outdoor use. The brightness is 4000 NITS. There are 2 LED modules per panel. This allows for easy serviceability. The AV4IP includes True 1 powerCon In/Out and etherCON In/Out water proof connections. This panel also features a Novastar receiving card. The AV4IP is a great video solution for indoor or outdoor use. ADJ offers full packages with video processors, software, cabling, rigging bars and flight cases so that you have everything you need to get up and running.

ADJ AV3/AV4 FWA Adapter for use with ADJ AV3/AV4IP

ADJ AV6X is a new and improved video panel. It still features the high resolution quality and performance that users have come to appreciate from the AV6, but it now features higher quality LEDs for better color consistency and a darker black masking for higher contrast. Each panel has a pixel pitch of 6.0mm with a configuration of a 3-in-1 RGB SMD2121 LED. The brightness is 1200NITS. There are 4 mini modular panels with-in the master panel. This allows for easy serviceability. The AV6X connections include powerCon In/Out and Ethercon In/Out. This panel has features a Navistar receiving card.

ADJ 3D Vision Panel Lock, accessory to the ADJ 3D Vision that quickly locks/unlocks two panels together (quick release).

ADJ 3D VISION RB1 Metal rigging bar for the ADJ 3D Vision panels. Use this rigging bar when hanging 3D Vision Panels from Truss. Quick release Panel Locks (JP13988) must be used to lock the Panel to the Rigging Bar.

ADJ AV6RB2, Single panel rigging bar for AV6 panel. Adjustable eye bolt to avoid truss cross bars. Single panel rigging bar for the AV6 or AV6X video panels. Up to 20 panels maximum vertical hang.

ADJ AV3RB1, Single panel rigging bar for AV3 video panel. Holds up to 15 AV3 video panels hung vertically.