LED Pinspot Bar 5W RGB, The RGB LED Pinspot Bar 5W has DMX control or Infra Red control for easy control and functionality. The 5W LED Pinspot Bar features six 5W RGB pinspots on a pre-mounted lighting bar.

The Par 16 Warm-on-Dim offers you a ready to use parcan. The built-in LED module works direct on main voltage input and can be dimmed with any traditional triac dimmer. On 100% output the Par 16 Warm On Dim offers a nice 2700K. By dimming down the intensity the color temperature goes down back to 1800K simulating a real Tungsten dimming curve with still an impressive CRI of over 90.

The Par 30 Warm On Dim offers you a ready to use parcan. The built-in LED module works direct on main voltage input and can be dimmed with any traditional triac dimmer. On 100% output the Par 30 Warm On Dim offers a nice 2700K. By dimming down the intensity the color temperature goes down back to 1800K simulating a real Tungsten dimming curve with still an impressive CRI of over 90.

Equinix MaxiPar Tri MKII, This compact, slim profile par is designed for uplighting as well as stage lighting, and will bring deep, rich colours to any event or venue. It features 12 x 3W tri-colour RGB LEDs which offer smooth colour mixing. Operational modes including DMX, auto, sound active and master/slave modes.

MicroPar RGBW, These extremely powerful fixtures feature 1W LEDs and produce a varied range of effects including colour change and fade effects controllable in auto and sound active modes along with DMX. A dual bracket is included allowing the fixture to be hung or stood on the floor.

MidiPar RGBW, These extremely powerful fixtures feature 1W LEDs and produce a varied range of effects including colour change and fade effects controllable in auto and sound active modes along with DMX. A dual bracket is included allowing the fixture to be hung or stood on the floor.

Equinox 12W Quad LED Pinspot (Black Housing), This 12W quad-colour pinspot features a 4° beam angle and multiple modes, perfect for table spotting, events and architectural applications.

Equinox 12W Quad LED Pinspot (White Housing), This 12W quad-colour pinspot features a 4° beam angle and multiple modes, perfect for table spotting, events and architectural applications.

Equinox Party Par LED Par 56 Can (Polished Housing), Featuring 177 x 5mm RGB LEDs the Equinox Party Par outputs spots of colour that produce stunning performances of all sizes. The units operate in several modes, including, DMX and stand alone.

Equinox Party Par LED Par 56 Can (Black), Featuring 177 x 5mm RGB LEDs the Equinox Party Par outputs spots of colour that produce stunning performances of all sizes. The units operate in several modes, including, DMX and stand alone.

Equinox LED Par 64 (Polished Housing), Featuring high intensity 10mm LEDs, this par can boasts not only a great output but superb eye candy effects as well for performances of all sizes. The units operate in several modes, including DMX, static colour, colour mix, auto, sound active and master/slave. Internal programs guarantee a stunning show when several units are linked together.

LEDJ Event Spot RGBW MkII - Black Housing, The Event Spot compact LED Pinspots are powered by a 15W LED that has the brightness and output of a 100W halogen lamp. Featuring a 4° beam angle and supplied with two optional lenses (10° and 45°) the fixture is easily directed at displays for highlighting and pinspotting, it can also be used to create mood lighting on a restaurant table, or to spotlight displays in store. On-board features include manual colour selection, colour change,colour fade, sound activation and DMX.

LEDJ Event Spot Replacement Lens Set, Replacement lens set for the LEDJ Event Spot Series.

LEDJ Intense 9HEX10 LED Slim Par, Powered by 9 x 10W RGBWAUV LEDs within a compact, die-cast chassis the Intense 9HEX10 provides a smooth wash of vibrant colour. Featuring 6-in-1 colour LEDs this fixture advances from standard RGB colour mixing with the addition of white for pastel shades, amber for rich, warm tones and UV for intense hues. The convection cooled chassis ensures silent running and features mounting points for the optional barn door/gel frame kit (LEDJ253A).

Intense 9HEX10 LED Slim Par White Housing, Powered by 9 x 10W LEDs this HEX fixture provides a smooth wash of vibrant colour. Alongside the pastel shades and warm tones, the addition of UV means intense hues can be created. This super bright, robust, slimline par is suitable for a wide range of applications from uplighting a large venue to lighting a stage for live performances. The convection cooled chassis ensures silent running and features mounting points for the optional barn door/gel frame kit (LEDJ253AZ).

LED Intense 19T3 RGB LED Slim Par 19 x 3W Tri LEDs, The LED Intense 19T3 is powered by nineteen RGB LED's within a compact, convection cooled die-cast chassis. The Intense 19T3 provides a smooth wash of vibrant colour. It excels beyond standard tri-colour fixtures with the advantage of enhanced effects driven by the LED arrangement allowing flower like pixel effects. The convection cooled chassis ensures silent running and features mounting points for the optional barn door/gel frame kit (LED Intense Barn Door / Gel Frame).

LED Intense 9P10 RGBAW LED Slim Par 9 x 10W Tri LEDs, The LED Intense 9P10 is powered by nine RGBAW LED's within a compact, convection cooled die-cast chassis. The Intense 9P10 provides a smooth wash of vibrant colour. Featuring five colour LED's the Intense 9P10 advances from standard RGB colour mixing with white for pastel shades and amber for rich, warm tones. The convection cooled chassis ensures silent running and features mounting points for the optional barn door/gel frame kit (LED Intense Barn Door / Gel Frame).

LEDJ Intense Barn Door / Gel Frame, Optional barn door and gel frame kit designed for use with the LEDJ Intense series. Supplied complete with all fixings and components, the kit allows the user to install either barn doors alone or barn doors and gel frame to the LEDJ Intense series slim par panels. Please note: Unit not included.
 

LEDJ Intense Barn Door / Gel Frame (White), Optional barn door and gel frame kit designed for use with the LEDJ Intense series. Supplied complete with all fixings and components, the kit allows the user to install either barn doors alone or barn doors and gel frame to the LEDJ Intense series slim par panels. Please note: Unit not included.

LEDJ 150W COB RGBA Par, The LEDJ Stage Washes use COB LEDs to produce a high output wash with smooth colour mixing and no colour shadows. They feature an 80° beam angle and also come supplied with three beam reduction lenses (25°, 40° and 50°) which are easily interchangeable. The 4-button DMX display allows access of built-in colour macros, 4 selectable dimmer curves, 0-100% electronic dimming and selections of stand-alone, sound active and DMX modes.

LEDJ 150W COB CW/WW Par, The LEDJ Stage Washes use COB LEDs to produce a high output wash with smooth colour mixing and no colour shadows. They feature an 80° beam angle and also come supplied with three beam reduction lenses (25°, 40° and 50°) which are easily interchangeable. The 4-button DMX display allows access of built-in colour macros, 4 selectable dimmer curves, 0-100% electronic dimming and selections of stand-alone, sound active and DMX modes.

LEDJ Ninja Zoom 250, The Ninja Zoom 250 is a truly versatile zoom loaded with a 40W quad-colour RGBW LED and a variable beam angle of 4° to 29°. Smooth colour mixing coupled with a flexible beam size creates focused spots and large area washes in one extremely compact housing. The rear menu system allows control of static colours, fades and chases, zoom, master/slave, sound activation and DMX modes.

LEDJ Performer 18 Quad Zoom, The Performer Quad features 18 x 8W quad-colour LEDs and a spectacular 25°-75° zoom feature creating a wide wash or focussed beam, ideal for stage productions, concerts or conferences. This fixture offers superior performance in a robust, yet lightweight cast aluminium housing, and features a simple to operate 4 push button menu that allows users to select several operation modes.

LED Performer 18 Quad Par 18 x 8W Quad LEDs, The LED Performer 18 features a 4-in-1 LED engine and produces no multi-coloured shadowing. Thanks to its 18 x 8W quad coloured LEDs, the LED Alu Performer Par punches out astonishing spots of colour that can serve as a stunning show for various applications from uplighting a large venue and lighting a stage for live performances.

LEDJ Performer 18 Quad MKII (20 Degree), The Alu Performer Par has 18 x 8W quad-colour LEDs punching out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination. This fixture offers superior performance in a robust, yet lightweight cast aluminium housing, and features a simple to operate 4 push button menu that allows users to select several operation modes.

Performer 18 Quad MKII (40 Degree) Chrome Housing, The Alu Performer Par has 18 x 8W quad-colour LEDs punching out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination. This fixture offers superior performance in a robust, yet lightweight cast aluminium housing, and features a simple to operate 4 push button menu that allows users to select several operation modes.

Performer 18 Quad MKII (40 Degree) White Housing, The Alu Performer Par has 18 x 8W quad-colour LEDs punching out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination. This fixture offers superior performance in a robust, yet lightweight cast aluminium housing, and features a simple to operate 4 push button menu that allows users to select several operation modes.

LEDJ Performer 18 RGBWA (18x 10W), Featuring 5-in-1 LED engine and produces no multi-coloured shadowing thanks to its 18 x 10W RGBWA LEDs, the Alu Performer Par punches out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination.

LEDJ Performer 18 HEX (18 x 12W 6-in-1 RGBWAUV), The Alu Performer Par HEX punches out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination. Featuring 18 x 12W six-colour LEDs the Performer HEX offers shadow free light output across a wide colour spectrum.

Performer 18 HEX MKII (18 x 12W 6-in-1 RGBWAUV) White Housing, The Alu Performer Par HEX has 18 x 12W six-colour LEDs punching out astonishing levels of colour ideal for uplighting in large venues, general stage wash and illumination. This fixture offers superior performance in a robust, yet lightweight cast aluminium housing, and features a simple to operate 4 push button menu that allows users to select several operation modes.

LEDJ Q Colour Hex, Utilising LED technology the Hex Colour adds intense colour to stages and performers. The fixture has a rugged chassis and provides exceptional quality, coverage and ease of use. With the ability to run built-in programs and perform full RGBW colour mixing with or without DMX control the fixture is perfect for architectural work and installation.

LED Q Colour, Utilising Quad RGBW LED technology the LED Q Colour adds washes of colour to stages and performers. With a revolutionary 4-in-1 LED engine, the fixture produces no multi-coloured shadows thanks to its 18 x 8 watt quad colour LEDs.

LEDJ Slimline 1T36, Housing a tri-colour 36W RGB COB LED, the Slimline 1T36 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing, side entry XLR and power connections and measure only 120mm in depth for easy transportation and installation. They feature a Interchangeable beam angle, 25° or 100° super wide beam angle ideal for washing walls, CYCs and stages in colour, and can be operated in sound active, stand-alone, master/slave or DMX modes.

LEDJ Slimline 1T36 (White Housing), Housing a tri-colour 36W RGB COB LED, the Slimline 1T36 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing, side entry XLR and power connections and measure only 120mm in depth for easy transportation and installation. They feature a Interchangeable beam angle, 25° or 100° supper wide beam angle ideal for washing walls, CYCs and stages in colour, and can be operated in sound active, stand-alone, master/slave or DMX modes.

LEDJ Slimline 1WW20 COB (Black Housing), Housing a 20W COB LED, the Slimline series gives smooth, even light across the wide 60° beam angle. Supplied with a removable 25° beam reduction lens the fixture offers greater versatility enabling rental companies to stock one product with two beam angle options. These units have rugged, all metal housing, side entry XLR and power connections and measure only 128mm in depth for easy transportation and installation. They can be operated in sound active, stand-alone, master/slave or DMX modes.

LEDJ Slimline 1T100 COB (Black Housing), Housing a 100W tri-colour RGB COB LED, the Slimline 1T100 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have a rugged, all metal housing, side entry XLR and power connections and measure only 130mm in depth for easy transportation and installation. They feature a super wide 110° beam angle ideal for washing walls, CYCs and stages in colour, and can be operated in sound active, master/slave or DMX modes.

LED 5Q5 5 x 5W Quad LED Floor Par RGBW with Infra Red, The LED 5Q5 floor par houses 5 Quad (RGBW) 5W LEDs which give smooth colour mixing from rich saturated hues to subtle pastel shades. The LED 5Q5 has a stylish compact housing that has been designed for easy transportation and installation, and the twin bracket is perfect for free standing or rigging applications.

LED 7Q5 7 x 5W Quad LED Floor Par RGBW with Infra Red, The LEDJ 7Q5 houses 7 Quad (RGBW) 5W LEDs, the Slimline LED 7Q5 give smooth colour mixing from rich saturated hues to subtle pastel shades. The LEDJ 7Q5 has a stylish compact housing has been designed for easy transportation and installation, and the twin bracket is perfect for free standing or rigging applications.

LEDJ Slimline 7Q5 RGBA (Black Housing), Housing 7 Quad (RGBA) 5W LEDs and featuring amber LEDs, the Slimline 7Q5 produces a wide spectrum of smooth colours from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing and measure only 99mm in depth for easy transportation and installation. They are also convection cooled for silent operation and feature a 25° beam angle. The 4 push button LED menu or optional  IR remote allows easy access to the functions including DMX, master/slave, sound active and stand alone.

LEDJ Slimline 7Q5 RGBA (White Housing), Housing 7 Quad (RGBA) 5W LEDs and featuring amber LEDs, the Slimline 7Q5 produces a wide spectrum of smooth colours from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing and measure only 99mm in depth for easy transportation and installation. They are also convection cooled for silent operation and feature a 25° beam angle. The 4 push button LED menu or optional  IR remote allows easy access to the functions including DMX, master/slave, sound active and stand alone.

LED 7Q5 7 x 5W Quad LED Floor Par RGBW with Infra Red White Housing, The LEDJ 7Q5 houses 7 Quad (RGBW) 5W LEDs, the Slimline LED 7Q5 give smooth colour mixing from rich saturated hues to subtle pastel shades. The LEDJ 7Q5 has a stylish compact housing has been designed for easy transportation and installation, and the twin bracket is perfect for free standing or rigging applications.

LEDJ Slimline 5Q5/7Q5 Snoot (White Finish), White Snoot for LEDJ Slimline 5Q5/7Q5 Series

LEDJ Slimline 7HEX6 (Black Housing) Housing 7 x 6W six-colour LEDs, the Slimline 7HEX6 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing and measure only 124mm in depth for easy transportation and installation. They are also convection cooled for silent operation and feature a 30° beam angle. The 4 push button LED menu or optional IR remote allow easy access to the functions including DMX, master/slave, sound active and stand alone.

LEDJ Slimline 7HEX6 (White Housing) Housing 7 x 6W six-colour LEDs, the Slimline 7HEX6 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have rugged, all metal housing and measure only 124mm in depth for easy transportation and installation. They are also convection cooled for silent operation and feature a 30° beam angle. The 4 push button LED menu or optional IR remote allow easy access to the functions including DMX, master/slave, sound active and stand alone.

ADJ PAR ZP120 RGBW - The ADJ PAR ZP120 RGBW is a modern LED twist to the traditional halogen Par Can. It has a silver polish exterior housing and is powered by a potent 115W quad C.O.B. LED (Chip On Board) LED with red, green, blue & white colors. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options.

LEDJ Slimline 12HEX12/1T100 Snoot (Black Finish), Black Snoot for LEDJ Slimline 12HEX12/1T100 Series

ADJ Saber Bar 6 - The Saber Bar 6 is a 6-head pinspot lighting system mounted on a 1-meter linear base with built-in power and DMX connections. Each pinspot is similar to the Saber Spot WW with a 15W Warm White LED (3100K) and an ACL lens that produces a razor sharp 4-degree beam. Each fixture’s X/Y axis may be individually adjusted manually for precision angling of the beams. There are two heavy duty adjustable brackets to mount the fixture to a ceiling or truss.

ADJ Element HexIP, from the Element Par Series, the Element HEXIP is an IP54 outdoor rated battery powered LED Par with ADJ’s WiFLY EXR wireless DMX for outdoor or indoor use. It’s powered by 4x 10W RGBAW+UV (6-IN-1) LEDs. The Element Par Series are lightweight and easy to operate with a carry handle and kickstand for uplighting, staging, events, productions and any mobile application. No cables or wires needed!

ADJ MOD TW100 - Modular LED Par

The ADJ Lighting Modular Series LED Pars allow lighting designers more flexibility when it comes to features, plus more power to create brilliant washes for stages, installations or mobile events. The Mod Pars are modular in two ways. First, the body moves so that you can create a snoot to eliminate side glare if desired. Second, designers can remove the black metal housing and replace it with a pearl white housing kit. In this way, LED Par owners can switch between black or white fixtures depending on the application without having to inventory two different fixtures.

MOD 60 KIT PEARL is a White Housing Kit for MOD 60 Series LED PARs.

MOD 100 KIT PEARL is a White Housing Kit for MOD 100 Series LED PARs.

Black Barndoor set for MOD Series LED PARs.

White Barndoor set for MOD Series LED PARs.

The ADJ WiFLY EXR HEX5 IP is an IP65 outdoor rated compact Wash Fixture with ADJ’s WiFLY Transceiver with wireless DMX built-in. It offers the power of 5x 10-Watt RGBWA+UV Hex LEDs (Red, Green, Blue, White, Amber, & UV) to create rich hues and smooth color mixing for stage or wall washing. ADJ’s WiFLY Transceiver will communicate up to 760m(open line of sight) with the WiFLY EXR HEX5 IP. This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 50W. DMX addressing may also be changed by the unit’s 4-button LED display, or controlled by a DMX Controller by DMX cabling or via ADJ’s stand alone WiFLY Transceiver.

ADJ COB Cannon Wash ST - LED Wash Fixture

The ADJ COB Cannon Wash ST is a shorter version of the popular COB Cannon Wash fixture. It uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash ST is a QUAD RGBA 4-In-1. It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.

ADJ COB Cannon Wash DW ST - LED Wash Fixture

The ADJ COB Cannon Wash DW ST is a shorter version of the popular COB Cannon Wash fixture. It uses advanced Warm White / Cool White COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no WW/CW shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash DW ST is a dual WW/CW 2-In-1). It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.

ADJ COB Cannon Wash ST Pearl - LED RGBA Wash Fixture

The ADJ COB Cannon Wash ST is a shorter version of the popular COB Cannon Wash fixture. It uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash ST is a QUAD RGBA 4-In-1. It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.

ADJ Barndoor for COB Cannon Wash Pearl, White

ADJ Barndoor for COB Cannon Wash & COB Cannon Wash DW, Black

The Saber Spot Go is a battery powered, compact Pinspot with smooth RGBW color mixing from one 15W 4-in-1 Quad LED, and features DMX-512, flicker-free operation, built-in ACL lens produces a razor sharp 4-degree beam angle and a battery life option of 2, 4, 6 or 8 hours.

The Saber Spot Go is ideal for use where electrical outlets are limited or running cables in not possible. The fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

ADJ Saber Spot DTW - Compact Warm White LED

The Saber Spot DTW is a compact spot fixture with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button LED display system on the rear panel. Its built-in ACL lens produces a 20-degree beam angle. It features a dim to warm effect that replicates a halogen-like dimming profile.

The ADJ Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle. Included are 2 additional fresnel lenses of 10 & 45 degres

The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

The Saber Spot RGBW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

The ADJ 5PX Hex is a versatile LED Par fixture with 5 x 12-Watt , 6-IN-1 HEX LEDs. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, powerKon and 3 & 5pin DMX connectors, it’s great for uplighting a venue.

5PX HEX professional features include: 4 DMX modes (6, 7, 8, & 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Daisy-chain up to 11 units together via the fixtures built-in PowerKon In/Out power connectors.

The 5PX HEX is compatible with the Dotz Par RF, easy-to-use, wireless RF remote (sold separately). Alternatively the fixture may be operated via a DMX controller or the units built-in programs.

The ADJ 5PX Hex Pearl is a versatile LED Par fixture with 5 x 12-Watt , 6-IN-1 HEX LEDs. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, powerKon and 3 & 5pin DMX connectors, it’s great for uplighting a venue.

5PX HEX professional features include: 4 DMX modes (6, 7, 8, & 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Daisy-chain up to 11 units together via the fixtures built-in PowerKon In/Out power connectors.

The 5PX HEX is compatible with the Dotz Par RF, easy-to-use, wireless RF remote (sold separately). Alternatively the fixture may be operated via a DMX controller or the units built-in programs.

ADJ 12PX Hex Pearl - Versatile LED Par fixture

The ADJ 12PX Hex Pearl is a versatile LED Par fixture with 12 x 12-Watt, 6-IN-1 HEX LEDs in a white metal housing. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, powerCon and 3 & 5pin DMX connectors, it’s great for uplighting a venue.

The ADJ 12PX HEX is a versatile LED Par fixture with 12 x 12-Watt, 6-IN-1 HEX LEDs made from all metal construction. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, power and DMX connectors, it’s great for uplighting a venue, or used as a stage wash.

12PX HEX professional features include: 4 DMX modes (6, 7, 8, & 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Users may choice 3-pin or 5-pin DMX connectors

The 12PX HEX is compatible with the Dotz Par RF, easy-to-use, wireless RF remote (Sold Separately). Alternatively, the fixture may be operated via a DMX controller or the unit's built-in programs.

The ADJ 18P Hex is an all metal, powerful 216W LED Par fixture with 18x 12-Watt, 6-IN-1 HEX LEDs. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, power and DMX connectors, it’s great for uplighting a large venue.

ADJ Par ZP100 3K - 100W LED Par Can

The ADJ Par ZP100 3K is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 100W warm white C.O.B. (Chip On Board) LED with a color temperature of 3000K. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options. Its external housing is a traditional Par Can silver polished aluminum.

ADJ PAR Z100 3k is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 100W warm white C.O.B. (Chip On Board) LED with a color temperature of 3000K. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options. The Par Z100 3K allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer packs need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.

ADJ Par Z120 RGBW - 115W LED Par Can

The Par Z120 RGBW is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 115W quad C.O.B. LED (Chip On Board) LED with red, green, blue & white colors. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options.

The ADJ Pinspot LED II is a Bright 3W white LED Pinspot with 3 degree beam angle

ADJ DF 64 Diffusion Filter The DF64 filter from American DJ can improve the quality of any Par LED. An inexpensive way to create a richer colour mix and improve the range of the beam angle by simply adding this filter. Made from a frosted piece of plastic plexy glass, the ADJ DF64 is made to be extremely durable.

The ADJ Dotz Par uses advanced COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGB shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the Dotz Par is a TRI 36W (3-In-1). The Dotz Par produces wash of 60-degrees (25-degrees if you put on the supplied lens kit). It has 4 DMX Channel modes for programming flexibility, 35 built-in color macros and 5 selectable Dim Curves.

ADJ Dotz Par RF remote

The ADJ Mega 64 Profile Plus is a compact, low profile wash fixture designed for uplighting, stage lighting and wall washing, and will bring color and excitement to any party. The Mega 64 Profile Plus is powered by twelve bright 4-Watt Quad (RGB+UV 4-In-1) LED. This Par is intelligently designed so that it may sit directly on the ground or inside truss without the hanging bracket because the power & DMX Ins and Outs sit on the side of the fixture, not on the rear. The Mega 64 Profile Plus offers smooth RGB Color Mixing with no RGB+UV shadows, has a 25-degree beam angle and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC2 wireless remote, which is sold separately, to control the Mega 64 Profile Plus.

ADJ Mega HEX Par is a compact, low profile par designed for up lighting and stage lighting, and will bring color and excitement to any event. This fixture features ADJ’s patented “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega Hex Par features 5 x 6-Watt, 6-IN-1 (RGBAW + UV) LEDs which offers smooth color mixing and can produce a larger-scale of colors than a 4-color LED, such as hot pink, lime green and electric blue. It has a 25-degree beam angle, 5 operational modes, and 5 DMX Channel modes for a variety of programming options. Users can use the included ADJ UC IR wireless remote to control black out, full on, strobe, dimming, sound active and color change. Or, control these fixtures with ADJ’s myDMX software or the Airstream DMX Bridge APP (both sold separately).

The ADJ Mega TriPar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega TriPar Profile Plus features 5 x 4-Watt, 4-N-1 RGB + UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB + UV Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega TriPar Profile Plus

The ADJ VPar Pak is a compact, low profile LED Par kit with two VPAR LED Pars, a soft case gig bag and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet uplighting and a 4-button DMX display. The VPar is designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The VPars offer smooth RGBA Color Mixing, have 40-degree beam angles, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Pars

Ultra Hex Par3 The ADJ Ultra HEX Par 3 is a versatile LED Par fixture with 3x 10-Watt , 6-IN-1 HEX LEDs. With a 40-degree beam angle, users may produce wide washes with smooth color mixing from 64 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, power and DMX connectors, it’s great for uplighting a venue. Ultra HEX Par 3 professional features include: 5 DMX modes (6, 7, 8, 11 & 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Daisy-chain up to 20 units together via the fixtures built-in IEC In/Out power connectors. The Ultra HEX Par 3 is compatible with the ADJ RFC, easy-to-use, wireless infrared remote. Alternatively the fixture may be operated via a DMX controller or the units built-in programs.

eLumen8 Alu Barn Door, High quality metal barn door and gel frame set for use with the Elumen8 and LEDJ ALU Par series lanterns. Please note: Unit not included. Requires screwdriver for fitment.

eLumen8 Alu HEX Par 64 Black (12 x 12W 6in1), Housing 12 x 12W hex-colour LEDs, the Alu HEX Par 64 gives smooth colour mixing from rich saturated hues to subtle pastel shades. These units have rugged housing and feature a 25° beam angle. The 4 push button LED menu allows for easy access to the functions including DMX, master/slave, sound active and stand alone.

Chauvet Pro FX Par 9 is a dynamic and compact multi-effect fixture. It has an outer ring of RGB+UV LEDs, a center LED, and SMD strobes, each featuring separate control. Mutable zones allow for spectacular effects via DMX. Sound activation, automated programs or easy control via the optional IRC-6 remote also let you easily achieve eye-catching effects. Save time setting up with power linking.

The Chauvet DJ COREpar 80 USB produces a full spectrum of light with color mixing of COB (Chip-on-Board) technology. The Chauvet COREpar 80 USB includes a separate magnetic lens to provide the flexibility to go from an ultra-wide wash to a narrow beam in seconds. High frequency LED dimming achieves smooth LED fades and ensures a flicker-free performance. Multiple control options include DMX, master/slave and sound activation modes and D-Fi USB compatibility provides wireless control. Point-and-shoot operation of static colors and automated programs is also possible with the optional IRC-6 remote control (sold separately). The unit’s sit-flat housing features power and DMX outlets on the side.

The Chauvet DJ COREpar 40 USB produces a full spectrum of light with the unsurpassed color mixing of COB (Chip-on-Board) technology and includes a separate magnetic lens to provide the flexibility to go from an ultra-wide wash to a narrow beam in seconds. High frequency LED dimming achieves smooth LED fades and ensures a flicker-free performance in video applications. Multiple control options include DMX, master/slave and sound activation modes and D-Fi USB compatibility provides wireless control. Point-and-shoot operation of static colors and automated programs is also possible with the optional IRC-6 remote control (sold separately). The unit’s robust sit-flat housing features power and DMX outlets on the side.

Chauvet Pro COLORdash Accent Quad delivers a tremendous punch of evenly mixed light into tight locations. Powered by a 10W quad color (RGBA) LED, the Chauvet COLORdash Accent Quad excels at delivering saturated colors and brilliant pastels with a soft, even glow. An onboard OLED display effortlessly controls and addresses the fixture via DMX or in a stand-alone mode.

Chauvet Pro COLORdash Par-Hex 7, Powered by seven hex-color RGBAWUV LEDs, the ultra-compact COLORdash Par-Hex 7 fits in places where other fixtures cannot and provides an intense ultraviolet wash without the need for a separate UV fixture. The seven LEDs project deeply saturated output and any variation of white, amber, or UV without multi-color shadows. A split-yoke bracket eliminates the need for floor stands. Power linking with Neutrik powerCON in and out connectors, and 3- and 5-pin DMX connectors ease connections and setup. COLORdash Par-Hex 7 also includes a built-in gel frame holder.

Chauvet Pro COLORdash Par-Quad 18 - 90W LED Par, The Chauvet COLORdash LED Par Quad-18 is powered by 18 quad-colored RGBA LEDs in a compact and durable housing. Amber LEDs help produce any variation of white and stunning saturated colors for an expansive palette devoid of multi-colored shadows. A split-yoke bracket eliminates the need for floor stands. Power linking, a locking IEC power input, as well as 3- and 5-pin DMX connectors simplify connections and setup. Chauvet COLORdash Par Quad-18 also includes a built-in gel frame holder.

Chauvet Pro COLORdash Par-18 Barn Doors, Block excess light from the stage and other architectural elements for the COLORdash Par-18 with this barn door and gel frame holder.

Chauvet Pro COLORdash Par-Quad 7 - 35W LED Par, Powered by seven quad-colored RGBA LEDs, the ultra-compact Chauvet COLORdash Par Quad-7 fits in places where other fixtures cannot. The seven LEDs project deeply saturated output and any variation of white, without multi-colored shadows. A split-yoke bracket eliminates the need for floor stands. Power linking, a locking IEC power input and 3- and 5-pin DMX connectors ease connections and setup. Chauvet COLORdash Par Quad-7 also includes a built-in gel frame holder.

The Chauvet Pro COLORdash S-Par 1 is the first of the next generation of COLORdash family of products which appear to have a single light source. Using a new high-power RGBA LED engine and homogenizing optic, COLORdash S-Par 1 is poised to become the workhorse of the Event lighting industry. The RGBA LEDs produce a beautifully blended color palette with a subtle soft edge. Fully convection cooled and using IP rated power and data connectors allows the fixture to be used indoors or out. An innovative touch display and rugged split yoke make this fixture perfect for any event.

Chauvet Pro COLORdash Par-Hex 7 adds the brightness and intensity of ultraviolet light to any design without requiring a separate UV filter. Featuring seven RGBWA + UV LED chips, it produces a rainbow of deeply saturated colors, plus any variation of white and bold UV with no distractive multi-colored shadows. Ideal for tours and live productions, this lightweight fixture has a 21° beam angle. Silent and flicker free, it’s also right at home at broadcast studios and houses of worship. Offering simple and complex DMX channel profiles, power linking, Neutrik powerCON connections as well as 3-and 5-pin DMX connectors, it lends itself to applications of any size.

Chauvet Pro COLORdash Par-Hex 12 is an intensely bright hex-colored RGBAW+UV LED wash light that satisfies the need for a color wash, a white wash, and a UV wash. It projects deeply saturated colors, a variety of whites, and a brilliant ultra-violet, flicker-free and without multi-colored shadows. It offers 4 distinct dimming curves and many DMX personalities for programming versatility. The lightweight yet rugged housing, split yoke, and Neutrik powerCON connections make COLORdash Par-Hex 12 a great fixture for lighting live productions and events.

Chauvet Pro COLORado 1-Tri Tour 14 x 3W LED, The COLORado 1-Tri Tour offers the same features and benefits as the COLORado 1 Tour, except that it comes with 14 3-watt tri-color LEDs, which eliminate the multi-colored shadows and produce a more even color. PowerCon connectors as well as direct DMX in and out provide faster and easier connection.

Chauvet Pro COLORado 1 Solo builds on the Chauvet COLORado line of fixtures with new all-environment performance and advanced optics. This powerful RGBW LED wash projects an even, fully homogenized beam through fast and smooth zooming optics. Utilizing new IP rated power and data connectors and full convection cooling allows the Chauvet COLORado 1 Solo to perform anywhere from a quiet theater performane to an outdoor summer music festival.

Chauvet Pro COLORado 2 Solo uses three 40 W RGBW engines to project a beautiful and fully homogenized beam through fast and smooth zooming optics. IP rated power and data connectors, and full convection cooling ensure a reliable and silent performance indoors and out, in a wide range of applications, from theatrical to outdoor festival productions.

The Chauvet Pro COLORado 3-SOLO grows the industry standard COLORado line of fixtures with all-environment performance and advanced optics pioneered with the COLORado 1 Solo. Three 60W RGBW engines project an intense, even, and fully homogenized beam through fast and smooth zooming optics, making it the brightest PAR style fixture in the series. Utilizing new IP rated power and data connectors and full convection cooling allows this fixture to perform anywhere from a silent main stage theater to an outdoor summer music festival.

Chauvet DJ LED Followspot 120ST, This portable, LED-powered followspot is equipped with a 120-watt white LED for a hardedge, focused beam. Easy to set up and tear down, LED Followspot 120ST comes with an included tripod.

Chauvet DJ EVE P-130 RGB is a robust RGB wash light designed for mobile lighting professionals. Interchangeable magnetic lenses are included to alter the beam to desired angles. EVE P-130 RGB has a sturdy cast aluminum housing that provides extra strength without added weight. D-Fi USB compatibility is also onboard providing the option for wireless master/slave or DMX control. Its fanless design ensures 100% silent operation and the unit’s high-frequency LED dimming offers flicker-free operation perfect for video use. The Chauvet DJ EVE P-130 RGB has a built-in gel frame holder and 6¼-inch accessory slot to hold barn doors. Flexible control connection options are onboard with both 3- and 5-pin DMX connectors. PowerCON-compatible power input/output connections allow secure power linking.

The Chauvet DJ SlimBANK T18 USB is a powerful washlight with 18 tri-color(RGB) LEDs that achieve smooth color mixing. Adjustable barn doors help direct and focus the light. Convenient control options include auto and sound-activation programs as well as DMX. USB compatibility provides fast and easy wireless options.

Chauvet DJ SlimPAR 64 RGBA, SlimPAR 64 RGBA is an LED PAR 64 with a slim, 2.5-inch thick casing that can fit almost anywhere. Boasting 180 red, green, blue and amber LEDs, the fixture offers static colors and color mixing with or without DMX.Use built-in automated and sound-activated programs and variable speed-pulse effect for use on the fly, or create your own looks using 4- or 8-channel DMX mode.

The Chauvet DJ SlimPAR H6 USB is a low-profile RGBAW+UV LED washlight with D-Fi USB compatibility for wireless master/slave or DMX control. It also works in sound-active mode. Built-in dimming curves provide smooth LED fading, and the 6-in-1 LED technology generates a broad spectrum of natural looking colors. Precise colors can also be created with the built-in LED display. Point-and-shoot operation of static colors and automated programs is possible with the optional IRC-6 remote. Compact designed, it works as truss warmer. Easily transports in the optional CHS-30 VIP Gear Bag.

The Chauvet DJ SlimPAR Pro H USB is designed for any application that calls for a high-power, low-profile LED washlight with precise colors. Features include D-Fi USB compatibility for wireless control. The Chauvet SlimPARPro H USB has no moving parts and is flicker-free, ideal for quiet and on-camera applications. Generate a broad spectrum of colors and achieve natural-looking color temperatures with 6-in-1 LED technology

The Chauvet DJ SlimPAR Pro W USB is a low-profile, variable white LED washlight featuring cool white, warm white, and amber LEDs. The Chauvet Slimpar Pro W has adjustable color temperatures can match existing lighting in addition to providing the perfect temperature for video.

The Chauvet DJ SlimPAR Pro Q USB is a high-powered quad-color (RGBA), low-profile washlight with D-Fi USB compatibility for wireless control. Dynamic and natural-looking amber LEDs provide expanded color mixing capabilities. Light spill control is possible because the fixture is compatible with most 7.5” barn doors.

Chauvet DJ SlimPAR Q6 USB

Featuring 6 quad-color LEDs the Chauvet SlimPAR Q6 USB is a low-profile, high-output quad-color (RGBA) LED wash light with built-in D-Fi USB compatibility for instant wireless connectivity. It is controllable via master/slave, DMX, standalone modes or the point-and-shoot IRC-6 remote (sold separately). It also features multiple user-configurable settings.The Chauvet SlimPAR Q6 USB creates natural-looking color temperatures thanks to punchy amber LEDs. Its flicker free operation makes it well-suited for video productions. Other features include a built in gel frame holder and a gel frame. With no moving parts, the fixture is ideal for applications where silence is essential. Multiple units can be power linked to save time running cables and extension cords.

Chauvet DJ SlimPAR Q12 USB is a low-profile, high-output quad-color (RGBA) LED wash light with D-Fi USB for instant wireless connectivity. The Chauvet SlimPar Q12 is controllable via master/slave, DMX, standalone modes or the point-and-shoot IRC-6 remote (sold separately). It also features multiple user-configurable settings. The Chauvet SlimPAR Q12 USB creates natural-looking color temperatures thanks to punchy amber LEDs. Its flicker free operation makes it well-suited for video productions. With no moving parts, the fixture is ideal for applications where silence is essential. Multiple units can be power linked to save time running cables and extension cords.

Chauvet DJ SlimPAR T6 USB is a low profile, high output tri-color (RGB) LED wash light with D-Fi USB compatibility for wireless master/slave or DMX control. As versatile as it is dependable, this compact fixture is an ideal truss warmer. Because of its even output, it’s also an excellent front light, and its flicker-free output makes it an ideal light for broadcast/video applications. The fixture’s tri-color LEDs virtually eliminate multicolored shadows. SlimPAR T6 USB has multiple user-configurable settings, and built-in automated programs are easily accessed via the IRC-6 remote, DMX or master/slave. Multiple units can be power linked.

ChauvetDJSlimPAR T12 USB

The Chauvet SlimPAR T12 USB is a high output tri-color (RBG) LED wash light with built-in D-FI USB compatibility to allow instant wireless control in DMX or master/slave mode. Tri-color LEDs virtually eliminate distractive multicolored shadows. The even, flicker-free output of this fixture makes it ideal for front light applications and use in video productions. The optional IRC-6 remote can be used to access automated programs, and control static colors. The Chauvet SlimPAR T12 is compact enough to fit inside truss sticks.

Chauvet DJ SlimPAR Q12 BT is a compact wash light with built-in Bluetooth wireless technology that allows you to control the light from any smart phone or tablet without the need for any additional hardware. SlimPAR Q12 BT features 12 quad-color (RGBA) LEDs that generate a broad spectrum of colors and achieve natural-looking color temperatures. Easily set static colors or automated programs with the optional IRC-6 remote or create eye-catching effects with sound-activated and automated programs. Download the BTAir app for free from your favorite online app store. Compatible with BTAir.

Chauvet DJ SlimPAR T12 BT makes remote light control easy with its on-board Bluetooth wireless technology. Download the BTAir app for free from your favorite app store and enjoy the ultra-convenient ease of controlling SlimPAR T12 BT right from your smart phone or tablet. SlimPAR T12 BT has 12 tri-color (RGB) LEDs and its compact design easily fits inside sticks of truss making it perfect for truss warming. An optional IRC-6 remote can also be used for control as well as DMX, automated and sound-activated programs. Compatible with BTAir.

Chauvet DJ LED Pinspot 2, The LED Pinspot 2 includes two front focal lens options to produce hard-edge beams for a variety of applications. The LED Pinspot 2 is extremely lightweight, at less than one pound, and is powered by a 3W white LED. The auto switching power supply allows the fixture to adapt to the voltage provided, ranging from 100V to 240V.

Xenpow 75W Strobe Tube,  Xenpow 75W strobe tube.

Chauvet DJ SlimPAR Pro QZ12 USB is a D-Fi USB compatible wash light with motorized zoom and quad-color (RGBA) LEDs designed for mobile lighting entertainers. A built-in gel frame holder and 7½-inch accessory slot to hold optional barn doors are onboard. Flexible control options are possible with 3- and 5-pin DMX connectors and PowerCON®-compatible power input/output connections provide sturdy and secure power linking. SlimPAR Pro QZ12 USB has built-in dimming curves to simulate halogen filaments. High-frequency LED dimming give flicker-free output ideal for video work and fanless design means 100% silent operation.

Chauvet Ovation P-56UV LED Par The Chauvet Ovation P-56UV LED Par is a compact, virtually silent par and the first of its kind to produce a flat and even field of true UV light with minimal projected visibility via a homogenized, single-source LED. Interchangeable lens plates are included for wide beam angles and the unit accepts standard 7.5 inch beam shaping accessories. Ideally suited for theatrical and studio applications, the virtually silent and bright par also features extremely smooth 16-bit dimming, as well as RDM and PWM for set-up ease.

Chauvet Ovation P-56FC LED Par The Chauvet Ovation P-56VW LED Par is a compact, bright, and virtually silent par that produces a homogenized, flat and even field of light from an advanced, single source LED. The unit features the same 6-color LED system found in the Ovation E-930VW ellipsoidal to produce nearly any temperature of white with high CRI and CQS. The par’s Color Temperature can be even further adjusted for +/- green, making it ideal for TV studios and broadcasted events. Interchangeable lens plates are included for medium and wide beam angles and the unit accepts standard 7.5” beam shaping accessories. The virtually silent par also features extremely smooth 16-bit dimming, as well as RDM and PWM for set-up ease.

Chauvet Ovation P-56WW LED Par The Chauvet Ovation P-56WW LED Par is a bright, compact, and virtually silent par with exceptionally high CRI that is ideal for theatrical and studio applications. The sleek, modern-style par produces a homogenized, single-source, flat and even field of light with the same efficient warm white LED system found in the award-winning Ovation E-260WW ellipsoidal. Interchangeable lens plates are included for medium and wide beam angles. The virtually silent par also features extremely smooth 16-bit dimming, as well as RDM and PWM for set-up ease. The unit accepts standard 7.5” beam shaping accessories.

Chauvet Ovation P-56FC LED Par The Chauvet Ovation P-56FC LED Par is a compact, virtually silent par that produces a homogenized, single-source, flat and even field of light with high CRI. The bright unit utilizes the same advanced full color-mixing RGBAL LED system found in the popular Ovation E-910FC ellipsoidal to produce subtle pastels to punchy saturates and nearly any temperature of white. Interchangeable lens plates are included for medium and wide beam angles and the unit accepts standard 7.5 inch beam shaping accessories. Ideal for theatrical and studio applications, the virtually silent par features extremely smooth 16-bit dimming, as well as RDM and PWM for ease of set-up.

Chauvet EZLink Par Q4 BT LED Wash Lantern The Chauvet EZLink Par Q4 BT LED Wash Lantern makes creating exhilarating lighting easy with EZLink Par Q4BT. This 100% wireless quad-color (RGBA) LED Par fixture is battery-powered and has Bluetooth wireless technology built in, allowing you to control EZLink Par Q4BT with the free BTAir app (patent pending) from any smartphone or tablet. No additional hardware needed! Genuine amber LEDs included with quad-color lights like EZLink Par Q4BT provide richly vibrant and warm color mixing or natural-looking color temperatures. Other convenient control options include the IRC-6 remote and sound-activated or automated programs. EZLink Par Q4BT fits best in the CHS-40 VIP Gear Bag.

Chauvet EZLink Par Q6 BT LED Lantern The Chauvet EZLink Par Q6 BT LED Lantern just made battery-powered lighting just got even more convenient with EZLink Par Q6BT, a 100% TRUE wireless battery-operated Par with built-in Bluetooth wireless technology. Harness the color-mixing power of this versatile fixture with six quad-color (RGBA) LEDs, including genuine amber, right from any smartphone or tablet—no additional hardware needed! Imagine the ability to wash smaller event spaces with dynamic lighting displays, using the free BTAir smartphone app (patent pending). EZLink Par Q6BT allows you convenient wireless non-DMX control using the IRC-6 remote or through sound-activated and automated programs. Fits best in the CHS-40 VIP Gear Bag.

Chauvet EZPin Pack4 Pinspot Pack Accent lighting and pin spotting with the battery-powered Chauvet EZPin Pack4 Pinspot Pack makes lighting centerpieces, cakes, and other event space focal-points easier than ever. EZpin Pack 4 bundles four EZpin fixtures and one IRC-6 remote into an easily transportable VIP gear bag; perfect for mobile entertainers and event producers. Each light has a magnetic base that affixes to most metal surfaces, eliminating the need for clamps. No metal surfaces? No problem! Easily attach the lights to drop ceiling supports or air wall frames using CHAUVET DJ Scissor Clip. EZpin Pack 4 includes variable white gels to achieve versatile lighting looks. You can even control the units remotely with the included IRC-6 remote.